Transmission with WebUI and OpenVPN
Docker container which runs Transmission torrent client with WebUI while connecting to OpenVPN.
It bundles certificates and configurations for the following VPN providers:
|Provider Name||Config Value|
|Private Internet Access||
When using PIA as provider it will update Transmission hourly with assigned open port. Please read the instructions below.
Run container from Docker registry
The container is available from the Docker registry and this is the simplest way to get it.
To run the container use this command:
$ docker run --cap-add=NET_ADMIN --device=/dev/net/tun -d \ -v /your/storage/path/:/data \ -v /etc/localtime:/etc/localtime:ro \ -e "OPENVPN_PROVIDER=PIA" \ -e "OPENVPN_CONFIG=Netherlands" \ -e "OPENVPN_USERNAME=user" \ -e "OPENVPN_PASSWORD=pass" \ -p 9091:9091 \ haugene/transmission-openvpn
You must set the environment variables
OPENVPN_PASSWORD to provide basic connection details.
OPENVPN_CONFIG is an optional variable. If no config is given, a default config will be selected for the provider you have chosen.
Find available OpenVPN configurations by looking in the openvpn folder of the GitHub repository. The value that you should use here is the filename of your chosen openvpn configuration without the .ovpn file extension. For example:
As you can see, the container also expects a data volume to be mounted.
This is where Transmission will store your downloads, incomplete downloads and look for a watch directory for new .torrent files.
By default a folder named transmission-home will also be created under /data, this is where Transmission stores its state.
Required environment options
||Sets the OpenVPN provider to use.||
||Your OpenVPN username||
||Your OpenVPN password||
Network configuration options
||Sets the OpenVPN endpoint to connect to.||
||Will be passed to OpenVPN on startup||See OpenVPN doc|
||Sets the local network that should have access.||
Firewall configuration options
When enabled, the firewall blocks everything except traffic to the peer port and traffic to the rpc port from the LOCAL_NETWORK and the internal docker gateway.
If TRANSMISSION_PEER_PORT_RANDOM_ON_START is enabled then it allows traffic to the range of peer ports defined by TRANSMISSION_PEER_PORT_RANDOM_HIGH and TRANSMISSION_PEER_PORT_RANDOM_LOW.
||Enables the firewall||
Transmission configuration options
You may override transmission options by setting the appropriate environment variable.
The environment variables are the same name as used in the transmission settings.json file
and follow the format given in these examples:
|Transmission variable name||Environment variable name|
As you can see the variables are prefixed with
TRANSMISSION_, the variable is capitalized, and
- is converted to
TRANSMISSION_BIND_ADDRESS_IPV4 will be overridden to the IP assigned to your OpenVPN tunnel interface.
This is to prevent leaking the host IP.
User configuration options
By default everything will run as the root user. However, it is possible to change who runs the transmission process.
You may set the following parameters to customize the user id that runs transmission.
||Sets the user id who will run transmission||
||Sets the group id for the transmission user||
Use docker env file
Another way is to use a docker env file where you can easily store all your env variables and maintain multiple configurations for different providers.
In the GitHub repository there is a provided DockerEnv file with all the current transmission and openvpn environment variables. You can use this to create local configurations
by filling in the details and removing the # of the ones you want to use.
Please note that if you pass in env. variables on the command line these will override the ones in the env file.
See explanation of variables above.
To use this env file, use the following to run the docker image:
$ docker run --cap-add=NET_ADMIN --device=/dev/net/tun -d \ -v /your/storage/path/:/data \ -v /etc/localtime:/etc/localtime:ro \ --env-file /your/docker/env/file \ -p 9091:9091 \ haugene/transmission-openvpn
Access the WebUI
But what's going on? My http://my-host:9091 isn't responding?
This is because the VPN is active, and since docker is running in a different ip range than your client the response
to your request will be treated as "non-local" traffic and therefore be routed out through the VPN interface.
How to fix this
The container supports the
LOCAL_NETWORK environment variable. For instance if your local network uses the IP range 192.168.0.0/24 you would pass
Alternatively you can reverse proxy the traffic through another container, as that container would be in the docker range. There is a reverse proxy being built with the container. You can run it using the command below or have a look in the repository proxy folder for inspiration for your own custom proxy.
$ docker run -d \ --link <transmission-container>:transmission \ -p 8080:8080 \ haugene/transmission-openvpn-proxy
Known issues, tips and tricks
Use Google DNS servers
Some have encountered problems with DNS resolving inside the docker container.
This causes trouble because OpenVPN will not be able to resolve the host to connect to.
If you have this problem use dockers --dns flag to override the resolv.conf of the container.
For example use googles dns servers by adding --dns 22.214.171.124 --dns 126.96.36.199 as parameters to the usual run command.
Restart container if connection is lost
If the VPN connection fails or the container for any other reason loses connectivity, you want it to recover from it. One way of doing this is to set environment variable
OPENVPN_OPTS=--inactive 3600 --ping 10 --ping-exit 60 and use the --restart=always flag when starting the container. This way OpenVPN will exit if ping fails over a period of time which will stop the container and then the Docker deamon will restart it.
Running it on a NAS
Several popular NAS platforms supports Docker containers. You should be able to set up and configure this container using their web interfaces. Remember that you need a TUN/TAP device to run the container. To set up the device it's probably simplest to install a OpenVPN package for the NAS. This should set up the device. If not, there are some more detailed instructions below.
If you are having issues with this container please submit an issue on GitHub.
Please provide logs, docker version and other information that can simplify reproducing the issue.
Using the latest stable verison of Docker is always recommended. Support for older version is on a best-effort basis.
Adding new providers
If your VPN provider is not in the list of supported providers you could always create an issue on GitHub and see if someone could add it for you. But if you're feeling up for doing it yourself, here's a couple of pointers.
You clone this repository and create a new folder under "openvpn" where you put the .ovpn files your provider gives you. Depending on the structure of these files you need to make some adjustments. For example if they come with a ca.crt file that is referenced in the config you need to update this reference to the path it will have inside the container (which is /etc/openvpn/...). You also have to set where to look for your username/password.
There is a script called adjustConfigs.sh that could help you. After putting your .ovpn files in a folder, run that script with your folder name as parameter and it will try to do the changes descibed above. If you use it or not, reading it might give you some help in what you're looking to change in the .ovpn files.
Once you've finished modifying configs, you build the container and run it with OPENVPN_PROVIDER set to the name of the folder of configs you just created (it will be lowercased to match the folder names). And that should be it!
So, you've just added your own provider and you're feeling pretty good about it! Why don't you fork this repository, commit and push your changes and submit a pull request? Share your provider with the rest of us! :) Please submit your PR to the dev branch in that case.
Using a custom provider
If you want to run the image with your own provider without building a new image, that is also possible. For some providers, like AirVPN, the .ovpn files are generated per user and contains credentials. They should not be added to a public image. This is what you do:
Add a new volume mount to your
docker run command that mounts your config file:
Then you can set
OPENVPN_PROVIDER=CUSTOMand the container will use the config you provided. If you are using AirVPN or other provider with credentials in the config file, you still need to set
OPENVPN_PASSWORD as this is required by the startup script. They will not be read by the .ovpn file, so you can set them to whatever.
Note that you still need to modify your .ovpn file as described in the previous section. If you have an separate ca.crt file your volume mount should be a folder containing both the ca.crt and the .ovpn config.
Controlling Transmission remotely
The container exposes /config as a volume. This is the directory where the supplied transmission and OpenVPN credentials will be stored.
If you have transmission authentication enabled and want scripts in another container to access and
control the transmission-daemon, this can be a handy way to access the credentials.
For example, another container may pause or restrict transmission speeds while the server is streaming video.
Running on ARM (Raspberry PI)
Since the Raspberry PI runs on an ARM architecture instead of x64, the existing x64 images will not
work properly. To support users that wish to run this container on a Raspberry Pi, there are 2 additional
Dockerfiles created. The Dockerfiles supported by the Raspberry PI are Dockerfile.armhf -- there is
also an example docker-compose-armhf file that shows how you might use Transmission/OpenVPN and the
corresponding nginx reverse proxy on an RPI machine.
Make it work on Synology NAS
Here are the steps to run it on a Synology NAS (Tested on DSM 6) :
- Connect as admin to your Synology SSH
- Switch to root with command
sudo su -
- Enter your admin password when prompted
- Create a TUN.sh file anywhere in your synology file system by typing
replacing foldername with any folder you created on your Synology
- Paste @timkelty 's script :
Create the necessary file structure for /dev/net/tun
if ( [ ! -c /dev/net/tun ] ); then
if ( [ ! -d /dev/net ] ); then
mkdir -m 755 /dev/net
mknod /dev/net/tun c 10 200
Load the tun module if not already loaded
if ( !(lsmod | grep -q "^tun\s") ); then
- Save the file with [escape] + `:wq!` - Go in the folder containing your script : `cd /volume1/foldername/` - Check permission with `chmod 0755 TUN.sh` - Run it with `./TUN.sh` - Return to initial directory typing `cd` - Create the DNS config file by typing `vim /volume1/foldername/resolv.conf` - Paste the following lines :
- Save the file with [escape] + `:wq!` - Create your docker container with a classic command like `docker run --cap-add=NET_ADMIN --device=/dev/net/tun -d -v /volume1/foldername/resolv.conf:/etc/resolv.conf -v /volume1/yourpath/:/data -e "OPENVPN_PROVIDER=PIA" -e "OPENVPN_CONFIG=Netherlands" -e "OPENVPN_USERNAME=XXXXX" -e "OPENVPN_PASSWORD=XXXXX" -p 9091:9091 --name "TransmissionVPN" haugene/transmission-openvpn` - To make it work after a nas restart, create an automated task in your synology web interface : go to **Settings Panel > Task Scheduler ** create a new task that run `/volume1/foldername/TUN.sh` as root (select '_root_' in 'user' selectbox). This task will start module that permit the container to run, you can make a task that run on startup. These kind of task doesn't work on my nas so I just made a task that run every minute. - Enjoy ## systemd Integration On many modern linux systems, including Ubuntu, systemd can be used to start the transmission-openvpn at boot time, and restart it after any failure. Save the following as `/etc/systemd/system/transmission-openvpn.service`, and replace the OpenVPN PROVIDER/USERNAME/PASSWORD directives with your settings, and add any other directives that you're using. This service is assuming that there is a `bittorrent` user set up with a home directory at `/home/bittorrent/`. The data directory will be mounted at `/home/bittorrent/data/`. This can be changed to whichever user and location you're using. OpenVPN is set to exit if there is a connection failure. OpenVPN exiting triggers the container to also exit, then the `Restart=always` definition in the `transmission-openvpn.service` file tells systems to restart things again.
Description=haugene/transmission-openvpn docker container
ExecStartPre=-/usr/bin/docker kill transmission-openvpn
ExecStartPre=-/usr/bin/docker rm transmission-openvpn
ExecStartPre=/usr/bin/docker pull haugene/transmission-openvpn
ExecStart=/usr/bin/docker run \
--name transmission-openvpn \
-v /home/bittorrent/data/:/data \
-e "OPENVPN_PROVIDER=TORGUARD" \
-e "OPENVPN_USERNAMEfirstname.lastname@example.org" \
-e "OPENVPN_PASSWORD=hunter2" \
-e "OPENVPN_CONFIG=Netherlands" \
-e "OPENVPN_OPTS=--inactive 3600 --ping 10 --ping-exit 60" \
-e "TRANSMISSION_UMASK=0" \
-p 9091:9091 \
--dns 188.8.131.52 \
--dns 184.108.40.206 \
Then enable and start the new service with:
$ sudo systemctl enable /etc/systemd/system/transmission-openvpn.service
$ sudo systemctl restart transmission-openvpn.service
If it is stopped or killed in any fashion, systemd will restart the container. If you do want to shut it down, then run the following command and it will stay down until you restart it.
$ sudo systemctl stop transmission-openvpn.service
$ sudo systemctl start transmission-openvpn.service