kuryr/libnetwork repository overview

* Docker 1.12 with SwarmKit (the new Swarm) does not support remote
  drivers. Therefore, it cannot be used with Kuryr. This limitation is
  to be removed in Docker 1.13.

Getting it running with a service container
-------------------------------------------

Prerequisites

The Dockerfile in the root of this repository can be used to generate a wsgi
Kuryr Libnetwork server container with docker build::

    docker build -t your_docker_username/libnetwork:latest .

Additionally, you can pull the upstream container::

    docker pull kuryr/libnetwork:latest

Note that you can also specify the tag of a stable release for the above
command instead of *latest*.

How to run the container

sudo mkdir -p /usr/lib/docker/plugins/kuryr
sudo curl -o /usr/lib/docker/plugins/kuryr/kuryr.spec \
https://raw.githubusercontent.com/openstack/kuryr-libnetwork/master/etc/kuryr.spec
sudo service docker restart

docker run --name kuryr-libnetwork \
  --net=host \
  --cap-add=NET_ADMIN \
  -e SERVICE_USER=admin \
  -e SERVICE_PROJECT_NAME=admin \
  -e SERVICE_PASSWORD=admin \
  -e SERVICE_DOMAIN_NAME=Default \
  -e USER_DOMAIN_NAME=Default \
  -e IDENTITY_URL=http://127.0.0.1:35357/v3 \
  -v /var/log/kuryr:/var/log/kuryr \
  -v /var/run/openvswitch:/var/run/openvswitch \
  kuryr/libnetwork

docker run --name kuryr-libnetwork \
  --net host \
  --cap-add NET_ADMIN \
  -v /etc/kuryr:/etc/kuryr:ro \
  -v /var/log/kuryr:/var/log/kuryr:rw \
  -v /var/run/openvswitch:/var/run/openvswitch:rw \
  kuryr/libnetwork

$ git clone https://git.openstack.org/openstack/kuryr-libnetwork
$ cd kuryr-libnetwork

::

    $ sudo pip install -r requirements.txt


Installing Kuryr's libnetwork driver

$ sudo pip install .

Generate sample config, `etc/kuryr.conf.sample`, running the following::

    $ ./tools/generate_config_file_samples.sh


Rename and copy config file at required path::

    $ cp etc/kuryr.conf.sample /etc/kuryr/kuryr.conf


For using Keystone v3, edit the Neutron section in `/etc/kuryr/kuryr.conf`, replace ADMIN_PASSWORD::

    [neutron]
    auth_url = http://127.0.0.1:35357/v3/
    username = admin
    user_domain_name = Default
    password = ADMIN_PASSWORD
    project_name = service
    project_domain_name = Default
    auth_type = password


Alternatively, for using Keystone v2, edit the Neutron section in `/etc/kuryr/kuryr.conf`, replace ADMIN_PASSWORD::

    [neutron]
    auth_url = http://127.0.0.1:35357/v2.0/
    username = admin
    password = ADMIN_PASSWORD
    project_name = service
    auth_type = password


In the same file uncomment the `bindir` parameter with the path for the Kuryr
vif binding executables. For example, if you installed it on Debian or Ubuntu::

    [DEFAULT]
    bindir = /usr/local/libexec/kuryr


Running Kuryr
~~~~~~~~~~~~~

Currently, Kuryr utilizes a bash script to start the service. Make sure that
you have installed `tox` before the execution of the command below::

    $ sudo ./scripts/run_kuryr.sh

After Kuryr starts, please restart your Docker service, e.g.::

    $ sudo service docker restart

The bash script creates the following file if it is missing:

* ``/usr/lib/docker/plugins/kuryr/kuryr.json``: Json spec file for libnetwork.

Note the root privilege is required for creating and deleting the veth pairs
with `pyroute2 <http://docs.pyroute2.org/>`_ to run.

Testing Kuryr
-------------

For a quick check that Kuryr is working, create a network::

    $ docker network create --driver kuryr --ipam-driver kuryr \
    --subnet 10.10.0.0/16 test_net
    785f8c1b5ae480c4ebcb54c1c48ab875754e4680d915b270279e4f6a1aa52283
    $ docker network ls
    NETWORK ID          NAME                DRIVER
    785f8c1b5ae4        test_net            kuryr

To test it with tox::

    $ tox

You can also run specific test cases using the ``-e`` flag, e.g., to only run
the *fullstack* test case::

    $ tox -e fullstack

Generating Documentation
------------------------


We use `Sphinx <https://pypi.python.org/pypi/Sphinx>`_ to maintain the
documentation. You can install Sphinx using pip::

    $ pip install -U Sphinx

In addition to Sphinx you will also need the following requirements
(not covered by `requirements.txt`)::

    $ pip install oslosphinx reno 'reno[sphinx]'

The source code of the documentation are under *doc*, you can generate the
html files using the following command. If the generation succeeds,a
*build/html* dir will be created under *doc*::

    $ cd doc
    $ make html

Now you can serve the documentation at http://localhost:8080 as a simple
website::

    $ cd build/html
    $ python -m SimpleHTTPServer 8080

Limitations
-----------

To create Docker networks with subnets having same/overlapping cidr, it is
expected to pass unique pool name for each such network creation Docker
command. Docker cli options -o and --ipam-opt should be used to pass pool
names as shown below::

    $ sudo docker network create --driver=kuryr --ipam-driver=kuryr \
      --subnet 10.0.0.0/16 --ip-range 10.0.0.0/24 \
      -o neutron.pool.name=neutron_pool1 \
      --ipam-opt=neutron.pool.name=neutron_pool1 \
      foo
      eddb51ebca09339cb17aaec05e48ffe60659ced6f3fc41b020b0eb506d364

Now Docker user creates another network with same cidr as the previous one,
i.e 10.0.0.0/16, but with different pool name, neutron_pool2::

    $ sudo docker network create --driver=kuryr --ipam-driver=kuryr \
      --subnet 10.0.0.0/16 --ip-range 10.0.0.0/24 \
      -o neutron.pool.name=neutron_pool2 \
      --ipam-opt=neutron.pool.name=neutron_pool2 \
      bar
      397badb51ebca09339cb17aaec05e48ffe60659ced6f3fc41b020b0eb506d786


External Resources
------------------

The latest and most in-depth documentation is available at:
    <https://github.com/openstack/kuryr/tree/master/doc/source>