Public | Automated Build

Last pushed: 9 months ago
Short Description
jbpm workbench showcase
Full Description

jBPM Workbench Showcase Docker image

JBoss jBPM Workbench Showcase Docker image.

Table of contents

  • Introduction
  • Usage
  • Users and roles
  • Logging
  • GIT internal repository access
  • Persistent configuration
  • Experimenting
  • Notes
  • Release notes


The image contains:

  • JBoss Wildfly 8.2.0.Final
  • jBPM Workbench 6.4.0.Final
  • jBPM Dashbuilder 6.4.0.Final

This image inherits from jboss/jbpm-workbench:latest and provides some additional configurations:

  • Default users and roles
  • Some examples
  • Single Sign On configuration for jBPM Workbench and jBPM Dashbuilder

This is a ready to run Docker image for jBPM Workbench. Just run it and try the jBPM Workbench!


To run a container:

docker run -p 8080:8080 -p 8001:8001 -d --name jbpm-workbench jboss/jbpm-workbench-showcase:latest

Once container and web applications started, you can navigate to it using one of the users described in section Users and roles, using the following URL:


Please note that in this image the examples and demos are enabled by default, so you need external connection to GitHub.
If your container runs without internet connection, please set KIE_DEMO the environment variable to value false as:

docker run -p 8080:8080 -p 8001:8001 -e KIE_DEMO=false -d --name jbpm-workbench jboss/jbpm-workbench-showcase:latest

Users and roles

This showcase image contains default users and roles:

admin       admin       admin,analyst,kiemgmt
krisv       krisv       admin,analyst
john        john        analyst,Accounting,PM
mary        mary        analyst,HR
sales-rep   sales-rep   analyst,sales
katy        katy        analyst,HR
jack        jack        analyst,IT
salaboy     salaboy     admin,analyst,IT,HR,Accounting


You can see all logs generated by the standalone binary running:

docker logs [-f] <container_id>

You can attach the container by running:

docker attach <container_id>

The jBPM Workbench web application logs can be found inside the container at path:


sudo nsenter -t $(docker inspect --format '{{ .State.Pid }}' $(docker ps -lq)) -m -u -i -n -p -w
-bash-4.2# tail -f /opt/jboss/wildfly/standalone/log/server.log

GIT internal repository access

The workbench stores all the project artifacts in an internal GIT repository. By default, the protocol available for accessing the GIT repository is SSH at port 8001.

This showcase image provides some examples at the uf-playground repository, that you can clone it by running:

git clone ssh://admin@localhost:8001/uf-playground

By default, the GIT repository is created when the application starts for first time at $WORKING_DIR/.niogit, considering $WORKING_DIR as the current directory where the application server is started.

You can specify a custom repository location by setting the following Java system property to your target file system directory:


NOTE: This directory can be shared with your docker host and with another containers using shared volumes when running the container, if you need so.

If necessary you can make GIT repositories available from outside localhost using the following Java system property:

You can set this Java system properties permanent by adding the following lines in your standalone-full.xml file as:

      <!-- Custom repository location. -->
      <property name="org.uberfire.nio.git.dir" value="/home/youruser/some/path"/>
      <!-- Make GIT repositories available from outside localhost. -->
      <property name="" value=""/>

NOTE: Users and password for ssh access are the same that for the web application users defined at the realm files.

Persistent configuration

As Docker defaults, once a container has been removed, the data within that container is removed as well.

At first glance this should not imply any issues as the assets authored on your workbench containers are not lost if you don't remove the container, you can stop and restart it
as many times as you need, and have different kie execution server container's consuming those assets, the problem comes if you need to remove and create new workbench containers.

In the case you need to create a persistent environment you can use an approach based on Docker Volumes. Here are two ways of doing it.

Using default GIT root directory

By default, the internal GIT root directory for the workbench container is located at /opt/jboss/wildfly/bin/.niogit, so you can make this directory persistent in your docker host by running the container using a docker shared volumne as:

docker run -p 8080:8080 -p 8001:8001 -v /home/myuser/wb_git:/opt/jboss/wildfly/bin/.niogit -d --name jbpm-workbench jboss/jbpm-workbench-showcase:latest

As the above command, now your workbench git repository will be persistent at your host filesystem's path /home/myuser/wb_git. So if you remove this container and start a new one just by using same shared volume, you'll find all your assets on the new workbench's container as well.

Using custom GIT root directory

Considering this showcase module as the base for this example, follow the next steps:

1.- Edit the standalone-full-jbpm.xml and change the default GIT repository location for your favourite one:

    <property name="org.kie.demo" value="${org.kie.demo:true}"/>
    <property name="org.kie.example" value="${org.kie.example:true}"/>
    <property name="designerdataobjects" value="${designerdataobjects:false}"/>

    <!-- Make GIT repositories root directory at /opt/jboss/wildfly/mygit. -->
    <property name="org.uberfire.nio.git.dir" value="/opt/jboss/wildfly/mygit"/>

    <!-- Make GIT repositories available from outside localhost. -->
    <property name="" value=""/>

2.- Edit the Dockerfile and add these lines:

USER root
RUN mkdir -p $JBOSS_HOME/mygit
RUN chown jboss:jboss $JBOSS_HOME/mygit
USER jboss

3.- Create your Docker image:

docker build --rm -t jboss/jbpm-workbench-showcase:MY_TAG

At this point, the default GIT root directory for the workbench will be located inside the Docker container at /opt/jboss/wildfly/mygit. So all your assets will be stored in the underlying git structure on this path.

In order to keep the git repositories between different containers you can just start the container by configuring a new host volume as:

docker run -p 8080:8080 -p 8001:8001 -v /home/myuser/wb_git:/opt/jboss/wildfly/mygit -d --name jbpm-workbench jboss/jbpm-workbench-showcase:MY_TAG

As the above command, now your workbench git repository will be persistent at your local filesystem path /home/myuser/wb_git. So if you remove this container and start a new one just by using same shared volume, you'll find all your assets on the new workbench's container as well.


To spin up a shell in one of the containers try:

docker run -t -i -p 8080:8080 -p 8001:8001 jboss/jbpm-workbench-showcase:latest /bin/bash

You can then noodle around the container and run stuff & look at files etc.


  • The context path for jBPM Workbench web application is jbpm-console and the context path for jBPM Dashbuilder web application is dashbuilder
  • jBPM Workbench version is 6.4.0.Final
  • jBPM Workbench requires running JBoss Wildfly using the full server profile
  • Internet connection required if using examples and demos (active by default)
  • No support for clustering
  • Use of embedded H2 database server by default
  • No support for Wildfly domain mode, just standalone mode
  • This image is not intended to be run on cloud environments such as RedHat OpenShift or Amazon EC2, as it does not meet all the requirements.
  • Please give us your feedback or report a issue at Drools Setup or Drools Usage Google groups.

Release notes


Docker Pull Command
Source Repository

Comments (0)