arm64 Kaspa Node for Raspberry Pi 4 Model B
10K+
Buy me a coffee: kaspa:qqz5xkyz36hj2pu9srdzd46wzlz2v24qf7mkgxtg44lnzl2gpxkp7jezgjf6z
Yes, you can run a Kaspa Node on your Raspberry Pi 4 Model B. I'm using an 8GB version and it's been working great! The 8GB version is required as the node idles around 4.5gb of mem when synced. I'm booting to Ubuntu 22.04.1 LTS on a 512GB SSD.
Shout out to supertypo for the detailed readme and his x86-64 and amd64 versions, supertypo/kaspad. I have copied some of his readme, but modified as appropriate here for this build image on a pi. Thank you supertypo!
There is also a great CLI reference for setting up a Kaspa node in docker on the kaspawiki.
Kaspa is an ancient Aramaic word for “silver” and “money.”
Kaspa aims to become the most resilient, robust and fastest PoW BlockDAG in the world.
https://kaspa.org
Kaspad release binaries are unaltered from the corresponding official version at:
https://github.com/kaspanet/kaspad (ISC licensed)
The loadbalancer, HAProxy, is GPLv2 licensed.
http://www.haproxy.org/
Build source for this image is available at:
https://github.com/nwbower/pi-docker-kaspad
Credit to supertypo for the loadbalancer and supporting readme reference available at:
https://github.com/supertypo/docker-kaspad
sudo apt update && sudo apt dist-upgrade -y
Reboot now if you're told to after the updates have been installed.
I used detailed instructions for installing on rpi here.
curl -fsSL https://get.docker.com -o get-docker.sh
sudo sh get-docker.sh
sudo systemctl enable docker
sudo mkdir -p /var/kaspad && sudo chown 51591 -R /var/kaspad
sudo docker run --pull always -d --restart unless-stopped -v /var/kaspad/:/app/data/ -p 16110:16110 -p 16111:16111 --name kaspad nwbower/pi-kaspad:latest
Thats it! The node will take some time to sync. For a Raspberry Pi this can take several hours.
Check the logs to know when it's ready.
sudo docker logs -n 1000 -f kaspad
The node is fully synced when it prints lots of "Accepted block ..." lines.
sudo docker system df -v
sudo docker rm -f kaspad
sudo docker run --pull always -d --restart unless-stopped -v /var/kaspad/:/app/data/ -p 16110:16110 -p 16111:16111 --name kaspad nwbower/pi-kaspad:latest
sudo docker stop kaspad
sudo rm -r /var/kaspad/.kaspad
sudo docker start kaspad
By forwarding port 16111 on your router (unless configured otherwise) to the machine running kaspad, your node becomes a public node which other members of the network can use to sync. Even though private nodes can still mine, it is encouraged that you make your node public for the general health of the network. Like any other decentralized systems, Kaspa works best when there are many public nodes. Additionally, forward 16110 for utxo mining access.
You will need an arm64 compatible version of golang. Install GO on your pi by executing these steps one by one.
curl -OL https://golang.org/dl/go1.20.linux-arm64.tar.gzsha256sum go1.20.linux-arm64.tar.gz
Confirm output from the last command looks like this:
17700b6e5108e2a2c3b1a43cd865d3f9c66b7f1c5f0cec26d3672cc131cc0994 go1.20.linux-arm64.tar.gz
sudo tar -C /usr/local -xvf go1.20.linux-arm64.tar.gz
sudo nano ~/.profile
Add following to end of the file and use ctl+x to save
export PATH=$PATH:/usr/local/go/bin
Refresh your profile.
source ~/.profile
Logout of ubuntu and then back in again to force a profile refresh. Check the version of go that is installed
go version
The version output should read as
go version go1.20 linux/arm64
That's it! You should be able to clone this repo and build your own Kaspa Docker image.
git clone https://github.com/nwbower/pi-docker-kaspad.git
Change directory
cd pi-docker-kaspad
Build the image
docker build -t kaspad .
When you are ready, run the container to start the node
docker-compose up -d
Raspberry Pi gets hot if it’s enclosed in a case without heat sinks. Use a proper heat sink with good ventilation to keep temperatures under control. There are some great cases built as a heat sink. I use and really like the flirc.
You can check the temperature as well as the clock speed in ubuntu to investigate overheating and or potential thermal throttling issues. I've not had any issues with the flirc case.
(result example 53069 means 53ºC)
sudo cat /sys/class/thermal/thermal_zone0/temp(result example 1500000 means 1500Mhz)
sudo cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freqHAProxy is used as loadbalancer, and the configuration is included in the kaspad_loadbalancer image (see git repo for details).
The HAProxy stats page is mapped to 9000 per default.
docker-compose.yaml:
version: "3"
services:
kaspad1:
container_name: kaspad1
image: nwbower/pi-kaspad:latest
restart: unless-stopped
volumes:
- kaspad1:/app/data/
# command: /app/kaspad --utxoindex --enablebanning --whitelist=192.168.1.0/24
kaspad2:
container_name: kaspad2
image: nwbower/pi-kaspad:latest
restart: unless-stopped
volumes:
- kaspad2:/app/data/
# command: /app/kaspad --utxoindex --enablebanning --whitelist=192.168.1.0/24
kaspad_loadbalancer:
container_name: kaspad_loadbalancer
image: supertypo/kaspad_loadbalancer:latest
restart: unless-stopped
ports:
- "9000:9000/tcp"
- "16110:16110/tcp"
- "16111:16111/tcp"
links:
- kaspad1
- kaspad2
volumes:
kaspad1:
kaspad2:
Run/upgrade with: sudo docker-compose pull && sudo docker-compose up -d
sudo docker rm -f kaspad1
sudo docker volume rm docker-kaspad_kaspad1
sudo docker-compose up -d
Content type
Image
Digest
sha256:671404128…
Size
27.1 MB
Last updated
almost 4 years ago
docker pull nwbower/pi-kaspad