Public | Automated Build

Last pushed: a year ago
Short Description
openHAB 1.8.3 - Configuration injected or Demo
Full Description

Overview

Docker image for Openhab (1.8.3). Included is JRE 1.8.45.

Based on the Image of tdeckers/docker-openhab

PULL

docker pull tweyand/openhab:latest

Building

docker build -t <username>/openhab:latest .

Exposed Ports

  • 8080 - openHAB HTTP Webinterface
  • 8443 - openHAB HTTPS Webinterface
  • 5555 - openHAB TELNET Interface
  • 9001 - supervisord Webinterface

Folders

The openHAB Docker expects you to map a configurations directory on the host to /etc/openhab. This allows you to inject your openhab configuration into the container (see example below). If you do not map your configurations, the Oficial Demo will be loaded.

  • /etc/openhab - openHAB configuration
  • /opt/openhab/logs - openHAB logs
  • /opt/openhab/webapps/static - Folder for uuid & secret for http://my.openhab.org
  • /opt/openhab/etc - Folder for data like db4o and rr4jd

Environment Variables

Docker Environment Variables to change the default behaviour, described in this file

  • OPENHAB_IP - Set the IP openHAB should listen to, this is usefull if you use "--net host" and have more than one ip adress attached to the host (Default: 0.0.0.0)
  • OPENHAB_VERSION - openHAB Version which should be used (Default: 1.8.3)
  • OPENHAB_HTTP_PORT - openHAB HTTP Port (Default: 8080)
  • OPENHAB_HTTPS_PORT - openHAB HTTPS Port (Default: 8443)
  • OPENHAB_TELNET_PORT - openHAB Telnet Port (Default: 5555)
  • SUPERVISORED_PORT - supervisord HTTP Port (Default:9001)

Timezone

You can add a timezone file in the configurations directory, which will be placed in /etc/timezone. Default: UTC

Example content for timezone:

Europe/Brussels

Addons

To enable specific plugins, add a file with name addons.cfg in the configuration directory which lists all addons you want to add.

Example content for addons.cfg:

org.openhab.action.mail
org.openhab.action.squeezebox
org.openhab.action.xmpp
org.openhab.binding.exec
org.openhab.binding.http
org.openhab.binding.knx
org.openhab.binding.mqtt
org.openhab.binding.networkhealth
org.openhab.binding.serial
org.openhab.binding.squeezebox
org.openhab.io.squeezeserver
org.openhab.persistence.cosm
org.openhab.persistence.db4o
org.openhab.persistence.gcal
org.openhab.persistence.rrd4j

KNX Binding (Network)

If you are running the KNX Binding, you might have problems to connect to your Router. You might need to use the network host to get it working.

openHAB Application Configuration

Please see the official documentation at http://www.openhab.org

Examples

Example: run command (with Demo)

docker run -d -p 8080:8080 tweyand/openhab

Example: run command (with your openHAB config)

docker run -d \
       -p 8080:8080 
       -v [Host-Filesystem-Configuration-Folder]:/etc/openhab/ \
       tweyand/openhab

Example: Map configuration and logging directory as well as allow access to Supervisor:

docker run -d \
       -p 8080:8080 
       -p 9001:9001 
       -v [Host-Filesystem]/DockerData/openhab/conf:/etc/openhab \
       -v [Host-Filesystem-Logs-Folder]:/opt/openhab/logs \
       tweyand/openhab

Example: Configuration which is working for me with KNX

docker run -d  \
       --name openhab_1.8.3 \
       --restart always \
       --net host \
       -e "OPENHAB_IP=192.168.0.100" \
       -e "OPENHAB_HTTP_PORT=80"
       -v [Host-Filesystem]/DockerData/openhab/conf:/etc/openhab \
       -v [Host-Filesystem]/DockerData/openhab/logs:/opt/openhab/logs \
       -v [Host-Filesystem]/DockerData/openhab/etc:/opt/openhab/etc \
       -v [Host-Filesystem]/DockerData/openhab/webapps/static:/opt/openhab/webapps/static \
       tweyand/openhab

Start the Demo with:

http://[IP-of-Docker-Host]:8080/openhab.app?sitemap=demo

Access Supervisor with:

http://[IP-of-Docker-Host]:9001

HABmin

HABmin is not included in this deployment. However you can easily add is as follows:

docker run -d -p 8080:8080 -v /<your_location>/webapps/habmin:/opt/openhab/webapps/habmin -v /<your_location>/openhab/config:/etc/openhab -v /<your_location>/openhab/addons-available/habmin:/opt/openhab/addons-available/habmin tdeckers/openhab

Then add these lines to addon.cfg

habmin/org.openhab.binding.zwave
habmin/org.openhab.io.habmin

Contributors

  • maddingo
  • scottt732
  • TimWeyand
  • dprus
  • tdeckers
  • wetware
  • carlossg
Docker Pull Command
Owner
tweyand
Source Repository