Prometheus

A Model Context Protocol (MCP) server that enables AI assistants to query and analyze Prometheus metrics through standardized interfaces. Connect to your Prometheus instance to retrieve metrics, perform queries, and gain insights into your system's performance and health.

6 Tools

Requires Configuration

Add to Docker Desktop

Version 4.43 or later needs to be installed to add the server automatically

Overview Tools (6)Config Manual installation

Github repository⁠

You can install this MCP server using:

Note: You should still configure the server and specify required secrets after installing it.

See client instructions below for how to connect the MCP Toolkit gateway to each client.

https://claude.ai/download⁠

Connect the MCP Toolkit gateway to Claude Desktop using:

Once connected, you can install this MCP server using:

Note: You should still configure the server and specify required secrets after installing it.

Restart Claude Desktop for the changes to take effect.

Open Claude Settings.
Select the Developer tab.
Select the Edit Config button.
Add prometheus to the mcpServers section:

{
  "mcpServers": {
    "prometheus": {
      "command": "docker",
      "args": [
        "run",
        "-i",
        "--rm",
        "-e",
        "PROMETHEUS_URL",
      - ghcr.io/pab1it0/prometheus-mcp-server@sha256:d99b048daa08637c40802e66ac5e6644f3cdf2b691eceb57516e29c4a6d189da
      ],
      "env": {
        "PROMETHEUS_URL": "{{prometheus.prometheus_url}}"
      }
    }
  }
}

https://www.continue.dev/⁠

Connect the MCP Toolkit gateway to Continue.dev using:

Once connected, you can install this MCP server using:

Note: You should still configure the server and specify required secrets after installing it.

In your global .continue folder (~/.continue on Mac/Linux, %USERPROFILE%.continue on Windows), create a a folder called mcpServers.
Create a new file named prometheus.yaml in the mcpServers folder.
Write the following contents to prometheus.yaml and save.

name: Docker MCP Prometheus
version: 1.0.1
schema: v1

mcpServers:
  - name: Prometheus
    command: docker
    args:
      - run
      - --rm
      - -i
      - -e
      - PROMETHEUS_URL
      - ghcr.io/pab1it0/prometheus-mcp-server@sha256:d99b048daa08637c40802e66ac5e6644f3cdf2b691eceb57516e29c4a6d189da
    env:
      PROMETHEUS_URL: "{{prometheus.prometheus_url}}"

https://www.cursor.com/downloads⁠

Connect the MCP Toolkit gateway to Cursor using:

Once connected, you can install this MCP server using:

Note: You should still configure the server and specify required secrets after installing it.

Open Cursor Settings.
Select the MCP Tools tab.
Select the New Custom MCP button.
Add prometheus to the mcpServers section:

{
  "mcpServers": {
    "prometheus": {
      "command": "docker",
      "args": [
        "run",
        "-i",
        "--rm",
        "-e",
        "PROMETHEUS_URL",
      - ghcr.io/pab1it0/prometheus-mcp-server@sha256:d99b048daa08637c40802e66ac5e6644f3cdf2b691eceb57516e29c4a6d189da
      ],
      "env": {
        "PROMETHEUS_URL": "{{prometheus.prometheus_url}}"
      }
    }
  }
}

https://code.visualstudio.com/⁠

Define the MCP Toolkit gateway as a server in the MCP Visual Studio Code user settings. Learn more⁠

"mcp": {
  "servers": {
    "MCP_DOCKER": {
      "command": "docker",
      "args": [
        "mcp",
        "gateway",
        "run"
      ],
      "type": "stdio"
    }
  }
}

Once connected, you can install this MCP server using:

Note: You should still configure the server and specify required secrets after installing it.

https://docs.docker.com/ai/gordon/⁠

Connect the MCP Toolkit gateway to Gordon using:

Once connected, you can install this MCP server using:

Note: You should still configure the server and specify required secrets after installing it.

Manual installation

You can install the MCP server using:

Installation for

Related servers

Explore

Contribute

Prometheus

6 Tools

Requires Configuration

Add to Docker Desktop

Version 4.43 or later needs to be installed to add the server automatically

Overview Tools (6)Config Manual installation

Github repository⁠

You can install this MCP server using:

Note: You should still configure the server and specify required secrets after installing it.

See client instructions below for how to connect the MCP Toolkit gateway to each client.

https://claude.ai/download⁠

Connect the MCP Toolkit gateway to Claude Desktop using:

Once connected, you can install this MCP server using:

Note: You should still configure the server and specify required secrets after installing it.

Restart Claude Desktop for the changes to take effect.

Open Claude Settings.
Select the Developer tab.
Select the Edit Config button.
Add prometheus to the mcpServers section:

{
  "mcpServers": {
    "prometheus": {
      "command": "docker",
      "args": [
        "run",
        "-i",
        "--rm",
        "-e",
        "PROMETHEUS_URL",
      - ghcr.io/pab1it0/prometheus-mcp-server@sha256:d99b048daa08637c40802e66ac5e6644f3cdf2b691eceb57516e29c4a6d189da
      ],
      "env": {
        "PROMETHEUS_URL": "{{prometheus.prometheus_url}}"
      }
    }
  }
}

https://www.continue.dev/⁠

Connect the MCP Toolkit gateway to Continue.dev using:

Once connected, you can install this MCP server using:

Note: You should still configure the server and specify required secrets after installing it.

In your global .continue folder (~/.continue on Mac/Linux, %USERPROFILE%.continue on Windows), create a a folder called mcpServers.
Create a new file named prometheus.yaml in the mcpServers folder.
Write the following contents to prometheus.yaml and save.

name: Docker MCP Prometheus
version: 1.0.1
schema: v1

mcpServers:
  - name: Prometheus
    command: docker
    args:
      - run
      - --rm
      - -i
      - -e
      - PROMETHEUS_URL
      - ghcr.io/pab1it0/prometheus-mcp-server@sha256:d99b048daa08637c40802e66ac5e6644f3cdf2b691eceb57516e29c4a6d189da
    env:
      PROMETHEUS_URL: "{{prometheus.prometheus_url}}"

https://www.cursor.com/downloads⁠

Connect the MCP Toolkit gateway to Cursor using:

Once connected, you can install this MCP server using:

Note: You should still configure the server and specify required secrets after installing it.

Open Cursor Settings.
Select the MCP Tools tab.
Select the New Custom MCP button.
Add prometheus to the mcpServers section:

{
  "mcpServers": {
    "prometheus": {
      "command": "docker",
      "args": [
        "run",
        "-i",
        "--rm",
        "-e",
        "PROMETHEUS_URL",
      - ghcr.io/pab1it0/prometheus-mcp-server@sha256:d99b048daa08637c40802e66ac5e6644f3cdf2b691eceb57516e29c4a6d189da
      ],
      "env": {
        "PROMETHEUS_URL": "{{prometheus.prometheus_url}}"
      }
    }
  }
}

https://code.visualstudio.com/⁠

Define the MCP Toolkit gateway as a server in the MCP Visual Studio Code user settings. Learn more⁠

"mcp": {
  "servers": {
    "MCP_DOCKER": {
      "command": "docker",
      "args": [
        "mcp",
        "gateway",
        "run"
      ],
      "type": "stdio"
    }
  }
}

Once connected, you can install this MCP server using:

Note: You should still configure the server and specify required secrets after installing it.

https://docs.docker.com/ai/gordon/⁠

Connect the MCP Toolkit gateway to Gordon using:

Once connected, you can install this MCP server using:

Note: You should still configure the server and specify required secrets after installing it.

Manual installation

You can install the MCP server using:

Installation for

Prometheus

Related servers

Grafana

Dynatrace MCP Server

Inspektor Gadget

Maestro MCP Server

Prometheus

Related servers

Grafana

Dynatrace MCP Server

Inspektor Gadget

Maestro MCP Server

Prometheus

Docker MCP CLIInstall this MCP server for all connected MCP clients

Claude DesktopConfigure Claude Desktop to connect to this MCP server

Continue.devConfigure Continue.dev to connect to this MCP server

CursorConfigure Cursor to connect to this MCP server

Visual Studio CodeConfigure Visual Studio Code to connect to this MCP server

GordonConfigure Gordon to connect to this MCP server

Related servers

Grafana

Dynatrace MCP Server

Inspektor Gadget

Maestro MCP Server

Prometheus

Docker MCP CLIInstall this MCP server for all connected MCP clients

Claude DesktopConfigure Claude Desktop to connect to this MCP server

Continue.devConfigure Continue.dev to connect to this MCP server

CursorConfigure Cursor to connect to this MCP server

Visual Studio CodeConfigure Visual Studio Code to connect to this MCP server

GordonConfigure Gordon to connect to this MCP server

Related servers

Grafana

Dynatrace MCP Server

Inspektor Gadget

Maestro MCP Server