Extract transport stream (TS) from tcpdump / wireshark "PCAP" capture files.
1.9K
pcap2mpegts allows you to extract MPEG video from "pcap" capture (tcpdump/wireshark) of UDP Multicast traffic. So in short, it allow you to convert a pcap capture file to a valid mpeg ts video file.
If the pcap file captured has multiple transport stream, on different IP (group) or UDP Ports, you must use the -p <dst_port> and or -i <mcast IP> -p <dst_port> so that the extracted TS has only the selected mpeg audio/video.
It's based on script posted by walto at ==> https://www.perlmonks.org/?node_id=661366
-l|--logfile <file> # input capture (PCAP) log file
-o|--outfile <file> # output transport stream file
-y|--yes # **overwrite** the output file without confirmation.
-p|--dest_port dest_port # filter extraction by UDP Destination Port
-i|--dest_ip dest_ip # filter extraction by mcast group IP.
*MUST* also specify port if IP is specified
docker run --rm -v $PWD:/inout bugre/pcap2mpegts \
--yes \
--logfile /inout/mycapture.pcap \
--outfile /inout/mycapture.ts
You must ansure that your multicast group 239.100.0.1/port (in this example) is already joined on the same server/NIC, so that the traffic is flowing on the NIC that you'll capture.
## specific multicast group (IP) and destination port on NIC eth0
tcpdump -nn -s0 -B 8192 -w mycapture.pcap -i eth0 host 239.100.0.1 and port 3456 and udp
## specific multicast group (IP) on NIC eth0
tcpdump -nn -s0 -B 8192 -w mycapture.pcap -i eth0 host 239.100.0.1 and udp
## all udp traffic seen on the NIC
tcpdump -nn -s0 -B 8192 -w mycapture.pcap -i eth0 udp
Content type
Image
Digest
sha256:ba5753d37…
Size
57.1 MB
Last updated
over 1 year ago
docker pull bugre/pcap2mpegts