cdmnky/matrix-everloop repository overview

⁠Matrix Creator - Everloop

This is an example everloop program running in a docker container that uses the Matrix Creator attached to a raspberry pi.

GitHub Repo: https://github.com/cthayer/matrix-creator-everloop⁠

⁠Run

docker run \
  -v /usr/include/matrix_hal:/usr/include/matrix_hal \
  -v /usr/lib/libmatrix_creator_hal.so:/usr/lib/libmatrix_creator_hal.so \
  -v /usr/lib/libwiringPi.so:/usr/lib/libwiringPi.so \
  -v /usr/lib/libwiringPiDev.so:/usr/lib/libwiringPiDev.so \
  --device=/dev/spidev0.0:/dev/spidev0.0 \
  cdmnky/matrix-everloop:1.0.2-arm32v7

Stop the container by running the following command in another terminal:

docker kill -s SIGINT <container_id>

⁠Pre-Requisites

⁠Hardware

• Raspberry Pi (3b or 4 is suggested)
• Matrix Creator⁠

⁠Software

• Matrix Hal⁠ must be installed on the host system
• Docker must be installed on the host system

⁠Build

Building the docker container must be done on a raspberry pi with Matrix Hal⁠ already installed.

packer build packer.json

⁠Pre-Requisites

⁠Hardware

• Raspberry Pi (3b or 4 is suggested)
• Matrix Creator⁠

⁠Software

• Matrix Hal⁠ must be installed on the host system
• Docker must be installed on the host system
• Packer⁠ must be installed on the host system