gjong/armhf-deconz-addon repository overview

⁠Raspbee deCONZ

The Raspbee is a RasberryPi shield that enables the controlling of Zigbee devices using the deCONZ software.

This docker images is designed to be run on any Hass.io running on a RasberryPi with a Raspbee shield installed.

⁠Adding devices

After the installation and starting of the addon you can use the Phoscon inferface to add and manage connected zigbee devices.

• Wireless Light Control (deprecated): http://hassio.local:8080⁠
• Phoscon: http://hassio.local:8080/pwa⁠

The default username/password is delight/delight.

⁠Preparing the RaspberyPi

⁠Enable the UART

• Shutdown the PI
• Remove the SD Card and insert in a PC
• Open the config.txt in the drive that automatically mounts
• Add the following lines at the bottom of the file

enable_uart=1
dtoverlay=pi3-disable-btroot

Some devices require an alternate configuration:

dtoverlay=pi3-disable-bt

⁠Updating the firmware

Automated updating of the firmware is currently not working in the addon, but can be done manually. To do this complete the following steps:

• Stop the addon using the Hassio interface
• Login to the Hass.io SSH⁠ (this should be on port 2222 with certificate login only)
• Run the following command:

docker run --rm -it --entrypoint "/bin/bash" --privileged \ 
       --device /dev/ttyAMA0:/dev/ttyAMA0:rwm \ 
       gjong/armhf-deconz-addon GCFFlasher_internal -f \ 
       /usr/share/deCONZ/firmware/deCONZ_Rpi_0x262f0500.bin.GCF

• Start the addon using the Hassio interface

This will start an upgrade of the firmware on the Raspbee

⁠Setting up with Home Assistant

If discovery: is enabled in the configuration.yaml, navigate to http://hassio.local:8123⁠ and select the Configure deCONZ option that should be displayed

If discovery: is not enabled, or you wish to configure it manually add the following code to the configuration.yaml:

deconz:
  host: hassio.local
# Change the port below to the one choosen in the addon
  port: 8080

Read more on the deCONZ setup on deCONZ component⁠ page

⁠Things to keep in mind

• The firmware upgrades do not work inside the container
• OTA updates are not yet confirmed to work from within the container

⁠Configuration of the addon

Note: Remember to restart the add-on when the configuration is changed.

{
    "deconz_device": "/dev/ttyAMA0",
    "web_port": 8080,
    "websockets_port": 8443,
    "info": 1,
    "aps": 0,
    "zcl": 0,
    "zdp": 0,
    "otau": 0,
    "vnc_active": false,
    "upgrade_firmware": false
  }

⁠Option: deconz_device

By default, deCONZ searches for RaspBee at /dev/ttyAMA0 and Conbee at /dev/ttyUSB0; when using other USB devices (e.g. a Z-Wave stick) deCONZ may not find RaspBee/Conbee properly. Set this environment variable to the same string passed to --device to force deCONZ to use the specific USB device.

⁠Option: web_port

By default, the web UIs ("Wireless Light Control" and "Phoscon") and the REST API listen on port 80; only set this environment variable if you wish to change the listen port.

⁠Option: websockets_port

By default, the websockets service listens on port 443; only set this environment variable if you wish to change the listen port.

⁠Option: info

Sets the level of the deCONZ command-line flag --dbg-info (default 1).

⁠Option: aps

Sets the level of the deCONZ command-line flag --dbg-aps (default 0).

⁠Option: zcl

Sets the level of the deCONZ command-line flag --dbg-zcl (default 0).

⁠Option: zdp

Sets the level of the deCONZ command-line flag --dbg-zdp (default 0).

⁠Option: otau

Sets the level of the deCONZ command-line flag --dbg-otau (default 0).

⁠Option: vnc_active

Indicates if a TigerVNC server should be started with a virtual display. This allows for connecting to the deCONZ software using a vncviewer application.

⁠Option: vnc_password

The password that should be set when starting the TigerVNC server.

Note: this option should be used when vnc_active is set to true.

⁠License

MIT License

Copyright (c) 2019 Gerben Jongerius

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.