gorogit/build-zybo-z7-linux repository overview

U-Boot Build make zynq_zybo_z7_defconfig make

Artifacts: spl/boot.bin  -> boot.bin u-boot.img    -> u-boot.img u-boot           -> u-boot.elf

Kernetl Build make ARCH=arm xilinx_zynq_defconfig make ARCH=arm menuconfig make ARCH=arm UIMAGE_LOADADDR=0x8000 uImage

Artifacts: arch/arm/boot/uImage arch/arm/boot/dts/zynq-zybo-z7.dtb

config u-boot setenv bootargs root=/dev/mmcblk0p2 saveenv

boot Linux kernel from u-boot　 Zynq> fatload mmc 0 0x03000000 uImage && fatload mmc 0 0x02A00000 zynq-zybo-z7.dtb && bootm 0x03000000 - 0x02A00000

Zynq> fatload mmc 0 0x02080000 uImage && fatload mmc 0 0x02000000 zynq-zybo-z7.dtb && bootm 0x02080000 - 0x02000000

Setup Ubuntu Image debootstrup xenial

fstab / proc /proc proc defaults 0 0 /dev/mmcblk0p1 /boot vfat defaults 0 2 /dev/mmcblk0p2 / ext4 defaults,noatime 0 1

getty ttyPS0 /etc/init/tty0.conf modify from " exec /sbin/getty -8 38400 tty0" to "exec /sbin/getty -8 115200 ttyPS0"

/tmp permission check chmod 1777 /tmp