ioexpert/armv6-nodered repository overview

⁠Getting started

⁠Installing Docker

First of all installing docker is required on Raspberry Pi. For running docker on Raspberry Pi, follwing parameters are needed to be added in /boot/cmdline.txt by sudo nano /boot/cmdline.txt:

cgroup_enable=memory cgroup_memory=1

Now a reboot is required by sudo reboot

Now docker can be installed by

sudo apt-get update
sudo apt-get dist-upgrade
curl -sSL -o install.sh https://get.docker.com
sh install.sh
sudo usermod -aG docker pi

⁠Installing Portainer

It makes sense to install a docker management on Raspberry Pi hosted on a website. This can be done by installing Portainer:

docker volume create portainer_data
docker run -d -p 8000:8000 -p 9000:9000 --name=portainer

Now docker can be managed via http://raspberrypi.local:9000/⁠

⁠Installing other Containers

See official Images for supported architectures: https://hub.docker.com/r/arm32v5⁠ in theory all Raspberry Pi models https://hub.docker.com/r/arm32v6⁠ like Raspberry Pi Zero https://hub.docker.com/r/arm32v7⁠ like Raspberry Pi 3 or 4 https://hub.docker.com/r/arm64v8⁠ like Raspberry Pi 4 in 64-bit mode

Old Images: https://hub.docker.com/u/armhf⁠ in theory all Raspberry Pi models

Available Images on Balena: https://www.balena.io/docs/runtime/resin-base-images/⁠

⁠Install this container

docker run --restart=always --publish 1880:1880 --detach --name bb ioexpert/armv6-nodered:latest

⁠License

View the license information for the software in the project. As with all Docker images, these likely also contain other software which may be under other licenses (such as Bash, etc from the base distribution, along with any direct or indirect dependencies of the primary software being contained). As for any pre-built image usage, it is the image user's responsibility to ensure that any use of this image complies with any relevant licenses for all software contained within.