This is a docker image that connects to Private Internet Access using wireguard. You can use this with other docker images to route all traffic through PIA. There also is optional port forwarding support.
| Variable | Description | Example | Default |
|---|---|---|---|
| PIA_USER* | Your PIA username. | p12345 | None |
| PIA_PASS* | Your PIA password. | password123 | None |
| PIA_REGION_ID* | The ID of your PIA region, you can find a list of regions here. | de-frankfurt | None |
| VPN_IP_CHECK_DELAY | The delay in seconds until the VPN IP is checked. | 5 | None |
| VPN_LAN_NETWORKS | A comma separated list of the local networks used to route local traffic. | 192.168.90.0/24 | None |
| PORT_FORWARDING | Enable port forwarding. The selected region must have port forwarding support if you enable this. | true | true |
| CONNECTION_FILE | Write a file that contains JSON data of the VPN IP and port (e.g. { "port": 1234, "ip": "127.0.0.1" }). It will be located at /config/connection.json. | true | false |
| PERSIST_PORT | Persist the port signature so the same port can be reused. The data will be stored at /config/signature.json. This signature usually lasts for a couple of months | true | false |
| BYPASS_PORTS | A comma separated list of ports that will send traffic through the local interface instead of PIA. | 8080/tcp,8080/udp | None |
| SET_QBITTORRENT_PORT | Automatically set the listening port in QBittorrent to the forwarded port. The QBittorrent API must be accessible via localhost:8080 (without credentials). | true | false |
| MAM_ID | If a MAM_ID is supplied, the dynamic seedbox IP for MyAnonaMouse will be set. | x2s__aaa... | None |
* = Required
Here is an example of forwarding all QBittorrent traffic through PIA. Once you receive the forwarded port (check logs), you can set it inside of QBittorrent's settings.
services:
qbittorrent:
container_name: qbittorrent
image: hotio/qbittorrent
restart: unless-stopped
environment:
- PUID=1000
- PGID=1000
- UMASK=022
- TZ=America/New_York
- VPN_ENABLED=false
- PRIVOXY_ENABLED=false
volumes:
- ${VOLUMES}/qbittorrent:/config
- ${VOLUMES}/downloads:/downloads
network_mode: service:vpn
depends_on:
- vpn
vpn:
image: j0ner/pia-wireguard
container_name: vpn
restart: unless-stopped
environment:
- PIA_USER=p123
- PIA_PASS=p123
- PIA_REGION_ID=de-frankfurt
- VPN_IP_CHECK_DELAY=5
- PORT_FORWARDING=true
- VPN_LAN_NETWORKS=192.168.90.0/24
- CONNECTION_FILE=false
- PERSIST_PORT=true
- BYPASS_PORTS=8080/tcp,8080/udp
- SET_QBITTORRENT_PORT=true
volumes:
- ${VOLUMES}/pia-wireguard:/config
cap_add:
- NET_ADMIN
ports:
- 8080:8080
sysctls:
- net.ipv4.conf.all.src_valid_mark=1
- net.ipv6.conf.default.disable_ipv6=1
- net.ipv6.conf.all.disable_ipv6=1
- net.ipv6.conf.lo.disable_ipv6=1
Content type
Image
Digest
sha256:2c8f73b94…
Size
12.3 MB
Last updated
over 2 years ago
docker pull j0ner/pia-wireguard