jfig/rpi-docker-gpsd repository overview

⁠rpi-docker-gpsd

This Docker image facilitates the running of the Linux GPS daemon (gpsd) on a Raspberry Pi, making it available as a network service. gpsd is a daemon that monitors one or more GPSes or AIS receivers attached to a host computer through serial or USB ports.

Docker image: jfig/rpi-docker-gpsd

Github repo: https://github.com/jfig/rpi-docker-python-gpio⁠

⁠Prerequisites

Ensure Docker is installed on your Raspberry Pi.

⁠Usage

To use gpsd, the GPS device's serial port needs to be mapped to the Docker container. This is essential for gpsd to communicate with the GPS device.

The default command to run the container is:

docker run --rm -it --device=/dev/ttyACM0:/dev/ttyUSB0 -p 2947:2947 gpsd

Here's what each parameter does:

--rm: Automatically remove the container when it exits.
-it: Interactive mode; allows you to interact with the container.
--device=/dev/ttyACM0:/dev/ttyUSB0: Maps the GPS device from the host (Raspberry Pi) to the container.
-p 2947:2947: Exposes the gpsd port, allowing network access to the service.

⁠Example docker/compose file

version: '3'

services:
  gpsd:
    image: jfig/rpi-docker-gpsd
    devices:
      - "/dev/ttyACM0:/dev/ttyUSB0
    ports:
      - "2947:2947"
    restart: always

  gps-consumer:
    image: your-gps-consumer-image  # Replace with your actual GPS consumer Docker image
    depends_on:
      - gpsd
    environment:
      GPSD_HOST: gpsd
      GPSD_PORT: 2947
    restart: always