jnovack/nut-to-mutt repository overview

⁠nut-to-mqtt

nut-to-mqtt is a transmogrifier for exporting data from Network UPS Tools (nut), and streaming to an MQTT broker.

⁠Quick Start

$ nut-to-mqtt \
    -nut_hostname=192.168.9.10 -nut_username=monitor -nut_password=hunter2 \
    -mqtt_hostname=172.23.4.5 -mqtt_username=user24601 -mqtt_password=hunter2

⁠Features

Currently tracks the following metrics from NUT:

• battery.charge - Battery charge (percent of full)
• battery.runtime - Battery runtime (seconds)
• battery.voltage - Battery voltage (V)
• input.voltage - Input voltage (V)
• ups.load - Load on UPS (percent of full)
• ups.status - UPS status

And publishes them to the MQTT broker under the following topic:

• v1/ups/UPSNAME/METRIC

Currently, there are some conversions to published data.

• battery.runtime - Read as seconds, published as minutes (with 1 decimal place)
• ups.status - Read as two-char code, published as full word

Example:

• battery.runtime is read as 2725 (seconds) and published to MQTT as 45.4 (minutes)
• ups.status is read as OL (code) and published to MQTT as Online (text).

⁠Docker Secret Support

nut_password and mqtt_password permit a _FILE suffix (for nut_password_file and mqtt_password_file) to not expose password via environment variables.

You must point to a file called nut_password or mqtt_password which should contain the password only.

Example:

$ nut-to-mqtt \
    -nut_hostname=192.168.9.10 -nut_username=monitor \
    -nut_password_file=/run/secrets/nut_password \
    -mqtt_hostname=172.23.4.5 -mqtt_username=user24601 \
    -mqtt_password_file=/run/secrets/mqtt_password

⁠Caveats

If connecting multiple nut-to-mqtt transmogrifiers to a single broker, each UPS should have a different name within their ups.conf. UPSes are identified by their name only, and not by their host.

Having a UPS called myups on two different hosts will result in metrics being overwritten.