jwelzel/rpi-acarsdec repository overview

ENTRYPOINT ["/usr/local/bin/acarsdec"]
CMD ["-o 1 -N flightaimap:9999 -r 1 131.550 131.725 131.525"]

Usage: acarsdec  [-v] [-o lv] [-t time] [-A] [-n ipaddr:port] [-l logfile] [-g gain] [-p ppm] -r rtldevicenumber  f1 [f2] ... [fN]

 -v                     : verbose
 -A                     : don't display uplink messages (ie : only aircraft messages)

 -o lv                  : output format : 0: no log, 1 one line by msg., 2 full (default) , 3 monitor mode, 4 newline separated JSON

 -t time                        : set forget time (TTL) in seconds for monitor mode (default=600s)
 -l logfile             : Append log messages to logfile (Default : stdout).
 -n ipaddr:port         : send acars messages to addr:port on UDP in planeplotter compatible format
 -N ipaddr:port         : send acars messages to addr:port on UDP in acarsdec native format
 -j ipaddr:port         : send acars messages to addr:port on UDP in acarsdec json format
 -i stationid           : station id used in acarsdec network format.

 -g gain                : set rtl preamp gain in tenth of db (ie -g 90 for +9db). By default use AGC
 -p ppm                 : set rtl ppm frequency correction
 -r rtldevice f1 [f2]...[f8]    : decode from rtl dongle number or S/N rtldevice receiving at VHF frequencies f1 and optionally f2 to f8 in Mhz (ie : -r 0 131.525 131.725 131.825 )