kecorbin/acimigrate repository overview

acimigrate is a flask application which will take configuration from a Nexus7000 or 9000 device, and replicate that configuration in ACI policies where VLAN = EPG = BD

The migration high level logic is as follows

• Interrogate the legacy nexus switches for VLAN/SVI information including name, subnet/gateway, HSRP VMAC
• Configure these as EPG's with a seperate bridge domain per EPG
• Create a contract allowing communication between all of the EPG's migrated. This simulates a common deployment scenario (no access-lists present at default gateway)
• Migrate L3 information (optional based on user input) should the default gateways be moved to the fabric
• Identify and unused port channel number on the Nexus side
• Configure selected physical interfaces into a VPC
• Allow migration VLAN's over the trunk

⁠Installation

The easiest way to use the acimigrate application is to pull the latest docker image from docker hub

docker run -d -p 8000:8000 imapex/acimigrate

That's it! Launch your browser and head over to [http://127.0.0.1:8000/⁠]

⁠Usage

Follow the on-screen wizard to gather the required input, then watch acimigrate do it's magic!

⁠Assumptions / Prereq

• VPC aggregation topology This project assumes that you have a traditional 7K/5K aggregation/access design with VPC's between the 7K and 5K

• HSRP is configured on SVI's

  acimigrate will use the HSRP VMAC address for configuration of the BD mac address in ACI. NOTE: acimigrate will handle a single HSRP group per SVI, however secondary HSRP addresses are supported.

• Layer 3 migration

  If L3 gateways are to be migrated to the fabric, it is assumed that the External L3Out's have already been configured

• NX-OS device w/ XML API enabled - the 7K aggregation switches must have the XML API enabled

  More details can be found at http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus7000/sw/programmability/guide/b_Cisco_Nexus_7000_Series_NX-OS_Programmability_Guide/b_Cisco_Nexus_7000_Series_NX-OS_Programmability_Guide_chapter_0110.html⁠

• LACP enabled

  Currently we assume that LACP is already in use on the Nexus 7000.

⁠TODO / Roadmap

• Complete provisioning of ACI side of migration VPC w/ cleanup
• Better error checking/handling
• Packaging for ACI App Center