A simple REST API endpoint for interacting with Lutron Caseta rollershades
468
This is simple Flask based API for interacting with Lutron Caseta
This was originally written specifically for controlling Lutron Shades, but can easily be modified to work with any Lutron Device.
After downloading, install using setuptools.
pip install -r requirements.txt
python main.py
The latest build of this project is also available as a Docker image from Docker Hub
docker pull kecorbin/lutron-shades-api
sudo docker run -d --restart=always -e LUTRON_HOST=<IP OF BRIDGE> --name shades-api --net=host shades-api
Open the shades
curl -X POST 127.0.0.1:5000/shades/open
Close the shades
curl -X POST 127.0.0.1:5000/shades/close
Set the shades at 50%
curl -X POST 127.0.0.1:5000/shades/50
Start Lowering a Device Group
/api/device/6/6/3 - Equivalent to #DEVICE,6,6,3
Stop Lowering a Device Group
/api/device/6/6/4 - Equivalent to #DEVICE,6,6,4
Start Raising a Device Group
#DEVICE,6,5,3
/api/device/6/5/3
Stop Lowering a Device Group
#DEVICE,6,5,4
/api/device/6/5/4
Once you have your API up and running, integrating with other hubs is super simple.
Checkout https://github.com/kecorbin/smartthings for a sample using Samsung Smartthings
This can also be used to integrate Lutron into Home Assistant, using the shades example from above, the following can be specified in your configuration.yaml file for HASS.
- platform: command_line
rollershutters:
Living Room Rollershutter:
upcmd: curl -X POST http://192.168.10.25:5000/shades/open
downcmd: curl -X POST http://192.168.10.25:5000/shades/close
stopcmd: curl -X POST http://192.168.10.25:5000/shades/50
Content type
Image
Digest
Size
185.4 MB
Last updated
about 10 years ago
docker pull kecorbin/lutron-shades-api