linuxserver/oscam

linuxserver/oscam⁠

Oscam⁠ is an Open Source Conditional Access Module software used for descrambling DVB transmissions using smart cards. It's both a server and a client.

Supported Architectures

We utilise the docker manifest for multi-platform awareness. More information is available from docker here⁠ and our announcement here⁠.

Simply pulling lscr.io/linuxserver/oscam:latest should retrieve the correct image for your arch, but you can also pull specific arch images via tags.

The architectures supported by this image are:

Architecture	Available	Tag
x86-64	✅	amd64-<version tag>
arm64	✅	arm64v8-<version tag>
armhf	❌

Application Setup

To set up oscam there are numerous guides on the internet. There are too many scenarios to make a quick guide. The web interface is at port 8888. You can find the project wiki here⁠.

Usage

To help you get started creating a container from this image you can either use docker-compose or the docker cli.

[!NOTE] Unless a parameter is flaged as 'optional', it is mandatory and a value must be provided.

docker-compose (recommended, click here for more info⁠)

---
services:
  oscam:
    image: lscr.io/linuxserver/oscam:latest
    container_name: oscam
    environment:
      - PUID=1000
      - PGID=1000
      - TZ=Etc/UTC
    volumes:
      - /path/to/oscam/data:/config
    ports:
      - 8888:8888
    devices:
      - /dev/ttyUSB0:/dev/ttyUSB0
    restart: unless-stopped

docker cli (click here for more info⁠)

docker run -d \
  --name=oscam \
  -e PUID=1000 \
  -e PGID=1000 \
  -e TZ=Etc/UTC \
  -p 8888:8888 \
  -v /path/to/oscam/data:/config \
  --device /dev/ttyUSB0:/dev/ttyUSB0 \
  --restart unless-stopped \
  lscr.io/linuxserver/oscam:latest

Passing through Smart Card Readers

If you want to pass through a smart card reader, you need to specify the reader with the --device= tag. The method used depends on how the reader is recognized. The first is /dev/ttyUSBX. To find the correct device, connect the reader and run dmesg | tail on the host. In the output you will find /dev/ttyUSBX, where X is the number of the device. If this is the first reader you connect to your host, it will be /dev/ttyUSB0. If you add one more it will be /dev/ttyUSB1.

If there are no /dev/ttyUSBX device in dmesg | tail, you have to use the USB bus path. It will look similar to the below.

/dev/bus/usb/001/001

The important parts are the two numbers in the end. The first one is the Bus number, the second is the Device number. To find the Bus and Device number you have to run lsusb on the host, then find your USB device in the list and note the Bus and Device numbers.

Here is an example of how to find the Bus and Device. The output of the lsusb command is below.

Bus 002 Device 005: ID 076b:6622 OmniKey AG CardMan 6121

The first number, the Bus, is 002. The second number, the Device, is 005. This will look like below in the --device= tag.

--device=/dev/bus/usb/002/005

If you have multiple smart card readers, you add one --device= tag for each reader.

Parameters

Containers are configured using parameters passed at runtime (such as those above). These parameters are separated by a colon and indicate <external>:<internal> respectively. For example, -p 8080:80 would expose port 80 from inside the container to be accessible from the host's IP on port 8080 outside the container.

Parameter	Function
`-p 8888:8888`	WebUI
`-e PUID=1000`	for UserID - see below for explanation
`-e PGID=1000`	for GroupID - see below for explanation
`-e TZ=Etc/UTC`	specify a timezone to use, see this list⁠.
`-v /config`	Where oscam should store config files and logs.
`--device /dev/ttyUSB0`	For passing through smart card readers.

Environment variables from files (Docker secrets)

You can set any environment variable from a file by using a special prepend FILE__.

As an example:

-e FILE__MYVAR=/run/secrets/mysecretvariable

Will set the environment variable MYVAR based on the contents of the /run/secrets/mysecretvariable file.

Umask for running applications

For all of our images we provide the ability to override the default umask settings for services started within the containers using the optional -e UMASK=022 setting. Keep in mind umask is not chmod it subtracts from permissions based on it's value it does not add. Please read up here⁠ before asking for support.

User / Group Identifiers

When using volumes (-v flags), permissions issues can arise between the host OS and the container, we avoid this issue by allowing you to specify the user PUID and group PGID.

Ensure any volume directories on the host are owned by the same user you specify and any permissions issues will vanish like magic.

In this instance PUID=1000 and PGID=1000, to find yours use id your_user as below:

id your_user

Example output:

uid=1000(your_user) gid=1000(your_user) groups=1000(your_user)

Docker Mods

We publish various Docker Mods⁠ to enable additional functionality within the containers. The list of Mods available for this image (if any) as well as universal mods that can be applied to any one of our images can be accessed via the dynamic badges above.

Support Info

Shell access whilst the container is running:
```
docker exec -it oscam /bin/bash
```
To monitor the logs of the container in realtime:
```
docker logs -f oscam
```

Container version number:

docker inspect -f '{{ index .Config.Labels "build_version" }}' oscam

Image version number:

docker inspect -f '{{ index .Config.Labels "build_version" }}' lscr.io/linuxserver/oscam:latest

Updating Info

Most of our images are static, versioned, and require an image update and container recreation to update the app inside. With some exceptions (noted in the relevant readme.md), we do not recommend or support updating apps inside the container. Please consult the Application Setup section above to see if it is recommended for the image.

Below are the instructions for updating containers:

Via Docker Compose

Update images:

All images:
```
docker-compose pull
```
Single image:
```
docker-compose pull oscam
```

Update containers:
- All containers:
  docker-compose up -d
- Single container:
  docker-compose up -d oscam
You can also remove the old dangling images:
```
docker image prune
```

Via Docker Run

Update the image:

docker pull lscr.io/linuxserver/oscam:latest

Stop the running container:
```
docker stop oscam
```
Delete the container:
```
docker rm oscam
```
Recreate a new container with the same docker run parameters as instructed above (if mapped correctly to a host folder, your /config folder and settings will be preserved)
You can also remove the old dangling images:
```
docker image prune
```

Image Update Notifications - Diun (Docker Image Update Notifier)

[!TIP] We recommend Diun⁠ for update notifications. Other tools that automatically update containers unattended are not recommended or supported.

Building locally

If you want to make local modifications to these images for development purposes or just to customize the logic:

git clone https://github.com/linuxserver/docker-oscam.git
cd docker-oscam
docker build \
  --no-cache \
  --pull \
  -t lscr.io/linuxserver/oscam:latest .

The ARM variants can be built on x86_64 hardware and vice versa using lscr.io/linuxserver/qemu-static

docker run --rm --privileged lscr.io/linuxserver/qemu-static --reset

Once registered you can define the dockerfile to use with -f Dockerfile.aarch64.

Versions

27.06.24: - Rebase to Alpine 3.20.
19.04.24: - Retrieve Oscam from the new git repo.
04.03.24: - Rebase to Alpine 3.19. Add libdvbcsa.
27.08.23: - Rebase to Alpine 3.18. Pull PCSC driver from Linuxserver S3 due to Cloudflare blocking curl download of original file.
07.07.23: - Deprecate armhf. As announced here⁠
13.03.23: - Rebase to Alpine 3.17.
03.11.22: - Rebasing to alpine 3.16 and s6v3. Update pcsd driver link.
13.02.22: - Rebasing to alpine 3.15.
19.12.19: - Rebasing to alpine 3.11.
28.06.19: - Rebasing to alpine 3.10.
29.04.19: - Add revision check, so pipeline can build new revisions.
28.04.19: - Switch back to streamboard svn to fix version not showing in UI.
23.03.19: - Switching to new Base images, shift to arm32v7 tag.
19.02.19: - Add pipeline logic and multi arch, rebase to Alpine 3.8.
03.01.18: - Deprecate cpu_core routine lack of scaling.
13.12.17: - Rebase to alpine 3.7.
19.10.17: - Add ccid package for usb card readers.
17.10.17: - Switch to using bzr for source code, streamboard awol.
28.05.17: - Rebase to alpine 3.6.
09.02.17: - Rebase to alpine 3.5.
14.10.16: - Add version layer information.
02.10.16: - Add info on passing through devices to README.
25.09.16: - Initial release.

Docker Pull Command

docker pull linuxserver/oscam