loginetsolutions/freeradius-server repository overview

export CLIENT_TOKEN=E0D439EE522F44368DC78E1BFB03710C-D24FB11DBE31D4621C4817E028D9E1D
export ACCESS_TOKEN=C66EF7B239D24632943D115EDE9CB810-EA00F8FD8294692C940F6B5A8F9453D
export MEWS_PRODUCTION=true

brew install freeradius-server

ipv4addr = *	# any.  127.0.0.1 == localhost

######################################################################
#
#  Configuration for the SQL module
#
#  The database schemas and queries are located in subdirectories:
#
#	sql/<DB>/main/schema.sql	Schema
#	sql/<DB>/main/queries.conf	Authorisation and Accounting queries
#
#  Where "DB" is mysql, mssql, oracle, or postgresql.
#
#

sql {
	# The sub-module to use to execute queries. This should match
	# the database you're attempting to connect to.
	#
	#    * rlm_sql_mysql
	#    * rlm_sql_mssql
	#    * rlm_sql_oracle
	#    * rlm_sql_postgresql
	#    * rlm_sql_sqlite
	#    * rlm_sql_null (log queries to disk)
	#
	driver = "rlm_sql_sqlite"

#
#	Several drivers accept specific options, to set them, a
#	config section with the the name as the driver should be added
#	to the sql instance.
#
#	Driver specific options are:
#
	sqlite {
		# Path to the sqlite database
		filename = "/tmp/freeradius.db"

		# How long to wait for write locks on the database to be
		# released (in ms) before giving up.
		busy_timeout = 200

		# If the file above does not exist and bootstrap is set
		# a new database file will be created, and the SQL statements
		# contained within the bootstrap file will be executed.
		bootstrap = "${modconfdir}/${..:name}/main/sqlite/schema.sql"
 	}

#	mysql {
#		# If any of the files below are set, TLS encryption is enabled
#		tls {
#			ca_file = "/etc/ssl/certs/my_ca.crt"
#			ca_path = "/etc/ssl/certs/"
#			certificate_file = "/etc/ssl/certs/private/client.crt"
#			private_key_file = "/etc/ssl/certs/private/client.key"
#			cipher = "DHE-RSA-AES256-SHA:AES128-SHA"
#
#			tls_required = yes
#			tls_check_cert = no
#			tls_check_cert_cn = no
#		}
#
#		# If yes, (or auto and libmysqlclient reports warnings are
#		# available), will retrieve and log additional warnings from
#		# the server if an error has occured. Defaults to 'auto'
#		warnings = auto
#	}
#
#	postgresql {
#
#		# unlike MySQL, which has a tls{} connection configuration, postgresql
#		# uses its connection parameters - see the radius_db option below in
#		# this file
#
#		# Send application_name to the postgres server
#		# Only supported in PG 9.0 and greater. Defaults to no.
#		send_application_name = yes
#	}
#

	# The dialect of SQL you want to use, this should usually match
	# the driver you selected above.
	#
	# If you're using rlm_sql_null, then it should be the type of
	# database the logged queries are going to be executed against.
	dialect = "sqlite"

	# Connection info:
	#
#	server = "localhost"
#	port = 3306
#	login = "radius"
#	password = "radpass"

	# Database table configuration for everything except Oracle
	radius_db = "radius"

	# If you are using Oracle then use this instead
#	radius_db = "(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521))(CONNECT_DATA=(SID=your_sid)))"

	# If you're using postgresql this can also be used instead of the connection info parameters
#	radius_db = "dbname=radius host=localhost user=radius password=raddpass"

        # Postgreql doesn't take tls{} options in its module config like mysql does - if you want to
        # use SSL connections then use this form of connection info parameter
#	radius_db = "host=localhost port=5432 dbname=radius user=radius password=raddpass sslmode=verify-full sslcert=/etc/ssl/client.crt sslkey=/etc/ssl/client.key sslrootcert=/etc/ssl/ca.crt"

	# If you want both stop and start records logged to the
	# same SQL table, leave this as is.  If you want them in
	# different tables, put the start table in acct_table1
	# and stop table in acct_table2
	acct_table1 = "radacct"
	acct_table2 = "radacct"

	# Allow for storing data after authentication
	postauth_table = "radpostauth"

	# Tables containing 'check' items
	authcheck_table = "radcheck"
	groupcheck_table = "radgroupcheck"

	# Tables containing 'reply' items
	authreply_table = "radreply"
	groupreply_table = "radgroupreply"

	# Table to keep group info
	usergroup_table = "radusergroup"

	# If set to 'yes' (default) we read the group tables unless Fall-Through = no in the reply table.
	# If set to 'no' we do not read the group tables unless Fall-Through = yes in the reply table.
#	read_groups = yes

	# If set to 'yes' (default) we read profiles unless Fall-Through = no in the groupreply table.
	# If set to 'no' we do not read profiles unless Fall-Through = yes in the groupreply table.
#	read_profiles = yes

	# Remove stale session if checkrad does not see a double login
	delete_stale_sessions = yes

	# Write SQL queries to a logfile. This is potentially useful for tracing
	# issues with authorization queries.  See also "logfile" directives in
	# mods-config/sql/main/*/queries.conf.  You can enable per-section logging
	# by enabling "logfile" there, or global logging by enabling "logfile" here.
	#
	# Per-section logging can be disabled by setting "logfile = ''"
#	logfile = ${logdir}/sqllog.sql

	#  Set the maximum query duration and connection timeout
	#  for rlm_sql_mysql.
#	query_timeout = 5

	#  As of version 3.0, the "pool" section has replaced the
	#  following configuration items:
	#
	#  num_sql_socks
	#  connect_failure_retry_delay
	#  lifetime
	#  max_queries

	#
	#  The connection pool is new for 3.0, and will be used in many
	#  modules, for all kinds of connection-related activity.
	#
	# When the server is not threaded, the connection pool
	# limits are ignored, and only one connection is used.
	#
	# If you want to have multiple SQL modules re-use the same
	# connection pool, use "pool = name" instead of a "pool"
	# section.  e.g.
	#
	#	sql1 {
	#	    ...
	#	    pool {
	#	    	 ...
	#	    }
	#	}
	#
	#	# sql2 will use the connection pool from sql1
	#	sql2 {
	#	     ...
	#	     pool = sql1
	#	}
	#
	pool {
		#  Connections to create during module instantiation.
		#  If the server cannot create specified number of
		#  connections during instantiation it will exit.
		#  Set to 0 to allow the server to start without the
		#  database being available.
		start = ${thread[pool].start_servers}

		#  Minimum number of connections to keep open
		min = ${thread[pool].min_spare_servers}

		#  Maximum number of connections
		#
		#  If these connections are all in use and a new one
		#  is requested, the request will NOT get a connection.
		#
		#  Setting 'max' to LESS than the number of threads means
		#  that some threads may starve, and you will see errors
		#  like 'No connections available and at max connection limit'
		#
		#  Setting 'max' to MORE than the number of threads means
		#  that there are more connections than necessary.
		max = ${thread[pool].max_servers}

		#  Spare connections to be left idle
		#
		#  NOTE: Idle connections WILL be closed if "idle_timeout"
		#  is set.  This should be less than or equal to "max" above.
		spare = ${thread[pool].max_spare_servers}

		#  Number of uses before the connection is closed
		#
		#  0 means "infinite"
		uses = 0

		#  The number of seconds to wait after the server tries
		#  to open a connection, and fails.  During this time,
		#  no new connections will be opened.
		retry_delay = 30

		# The lifetime (in seconds) of the connection
		lifetime = 0

		#  idle timeout (in seconds).  A connection which is
		#  unused for this length of time will be closed.
		idle_timeout = 60

		#  NOTE: All configuration settings are enforced.  If a
		#  connection is closed because of "idle_timeout",
		#  "uses", or "lifetime", then the total number of
		#  connections MAY fall below "min".  When that
		#  happens, it will open a new connection.  It will
		#  also log a WARNING message.
		#
		#  The solution is to either lower the "min" connections,
		#  or increase lifetime/idle_timeout.
	}

	# Set to 'yes' to read radius clients from the database ('nas' table)
	# Clients will ONLY be read on server startup.
#	read_clients = yes

	# Table to keep radius client info
	client_table = "nas"

	#
	# The group attribute specific to this instance of rlm_sql
	#

	# This entry should be used for additional instances (sql foo {})
	# of the SQL module.
#	group_attribute = "${.:instance}-SQL-Group"

	# This entry should be used for the default instance (sql {})
	# of the SQL module.
	group_attribute = "SQL-Group"

	# Read database-specific queries
	$INCLUDE ${modconfdir}/${.:name}/main/${dialect}/queries.conf
}

ln -s ../mods-available/sql sql

radiusd -X

docker build -t loginet.mews-wifi -f Dockerfile .

docker run -d --name mews-wifi.1 \
-e ACCESS_TOKEN='C66EF7B239D24632943D115EDE9CB810-EA00F8FD8294692C940F6B5A8F9453D' \
-e SENDER_NAME='[email protected]' \
-e SENDER_PASSWORD='MyStrongPassword' \
-e SMTP_SERVER='mail.example.com' \
-v /tmp:/mews-wifi/db -v ~/app-logs:/mews-wifi/logs loginet.mews-wifi:latest

docker ps

CONTAINER ID        IMAGE                      COMMAND             CREATED             STATUS              PORTS               NAMES
f026ca7e95bf        loginet.mews-wifi:latest   "./mews-wifi"       4 seconds ago       Up 2 seconds                            mews-wifi.1

tail -200f ~/app-logs/mews-wifi.log