madeliney/wireproxy repository overview

# The [Interface] and [Peer] configurations follow the same semantics and meaning
# of a wg-quick configuration. To understand what these fields mean, please refer to:
# https://wiki.archlinux.org/title/WireGuard#Persistent_configuration
# https://www.wireguard.com/#simple-network-interface
[Interface]
Address = 10.200.200.2/32 # The subnet should be /32 and /128 for IPv4 and v6 respectively
# MTU = 1420 (optional)
PrivateKey = uCTIK+56CPyCvwJxmU5dBfuyJvPuSXAq1FzHdnIxe1Q=
# PrivateKey = $MY_WIREGUARD_PRIVATE_KEY # Alternatively, reference environment variables
DNS = 10.200.200.1

[Peer]
PublicKey = QP+A67Z2UBrMgvNIdHv8gPel5URWNLS4B3ZQ2hQIZlg=
# PresharedKey = UItQuvLsyh50ucXHfjF0bbR4IIpVBd74lwKc8uIPXXs= (optional)
Endpoint = my.ddns.example.com:51820
# PersistentKeepalive = 25 (optional)

# TCPClientTunnel is a tunnel listening on your machine,
# and it forwards any TCP traffic received to the specified target via wireguard.
# Flow:
# <an app on your LAN> --> localhost:25565 --(wireguard)--> play.cubecraft.net:25565
[TCPClientTunnel]
BindAddress = 127.0.0.1:25565
Target = play.cubecraft.net:25565

# TCPServerTunnel is a tunnel listening on wireguard,
# and it forwards any TCP traffic received to the specified target via local network.
# Flow:
# <an app on your wireguard network> --(wireguard)--> 172.16.31.2:3422 --> localhost:25545
[TCPServerTunnel]
ListenPort = 3422
Target = localhost:25545

# STDIOTunnel is a tunnel connecting the standard input and output of the wireproxy
# process to the specified TCP target via wireguard.
# This is especially useful to use wireproxy as a ProxyCommand parameter in openssh
# For example:
#    ssh -o ProxyCommand='wireproxy -c myconfig.conf' ssh.myserver.net
# Flow:
# Piped command -->(wireguard)--> ssh.myserver.net:22
[STDIOTunnel]
Target = ssh.myserver.net:22

# Socks5 creates a socks5 proxy on your LAN, and all traffic would be routed via wireguard.
[Socks5]
BindAddress = 127.0.0.1:25344

# Socks5 authentication parameters, specifying username and password enables
# proxy authentication.
#Username = ...
# Avoid using spaces in the password field
#Password = ...

# http creates a http proxy on your LAN, and all traffic would be routed via wireguard.
[http]
BindAddress = 127.0.0.1:25345

# HTTP authentication parameters, specifying username and password enables
# proxy authentication.
#Username = ...
# Avoid using spaces in the password field
#Password = ...