MecabをAPIとして動かす docker-composeだけで動かせるサービス．
docker run -it -d -p 5000:3001 mhirano/mecab-api
ただし，ポート番号を変更する場合は，5000の部分を変更してください．
起動
docker-compose up -d
終了
docker-compose down
初期設定では，localhostの5000番にバインドされるように作ってありますので，
接続先はhttp://localhost:5000/となります．
変更の必要があれば，docker-compose.ymlのポートのバインド先をを5000から変更してください．
/mecab/v1/wakatiに
{"sentence":"日本語の文章"}
をpostすると，
{"wakati":["日本語","の","文章"]}
のようにわかち書きされて配列で返ってきます．
あるいは
/mecab/vi/wakati?sentence=日本語の文章
でも解析できます．
curl -H 'Content-Type:application/json' localhost:5000/mecab/v1/wakati -d '{"sentence":"すもももももももものうち"}' -XPOST
または
curl http://localhost:5000/mecab/v1/wakati?sentence=すもももももももものうち
またはブラウザで上記のアドレスにアクセス
結果:
{"wakati":["すもも","も","もも","も","もも","の","うち"]}
整形後:
{
"wakati": [
"すもも",
"も",
"もも",
"も",
"もも",
"の",
"うち"
]
}
/mecab/v1/analysisに同様にpostあるいは，queryを投げると，
{"analysis":[{形態素1の結果},{形態素2の結果},...}
と返ってきます．それぞれの結果は，
{"原型":"日本語","品詞":"名詞","品詞細分類1":"一般","品詞細分類2":"*","品詞細分類3":"*","活用型":"*","活用形":"*","発音":"ニホンゴ","表層形":"日本語","読み":"ニホンゴ"}
のようになっています．出力はMecabと同様に keyに表層形,品詞,品詞細分類1,品詞細分類2,品詞細分類3,活用型,活用形,原形,読み,発音を含むようになっていますが， keyの並びは崩れます．
curl -H 'Content-Type:application/json' localhost:5000/mecab/v1/analysis -d '{"sentence":"すもももももももものうち"}' -XPOST
または
curl http://localhost:5000/mecab/v1/analysis?sentence=すもももももももものうち
または，上記のアドレスにブラウザでアクセスする．
結果:
{"analysis":[{"原型":"すもも","品詞":"名詞","品詞細分類1":"一般","品詞細分類2":"*","品詞細分類3":"*","活用型":"*","活用形":"*","発音":"スモモ","表層形":"すもも","読み":"スモモ"},{"原型":"も","品詞":"助詞","品詞細分類1":"係助詞","品詞細分類2":"*","品詞細分類3":"*","活用型":"*","活用形":"*","発音":"モ","表層形":"も","読み":"モ"},{"原型":"もも","品詞":"名詞","品詞細分類1":"一般","品詞細分類2":"*","品詞細分類3":"*","活用型":"*","活用形":"*","発音":"モモ","表層形":"もも","読み":"モモ"},{"原型":"も","品詞":"助詞","品詞細分類1":"係助詞","品詞細分類2":"*","品詞細分類3":"*","活用型":"*","活用形":"*","発音":"モ","表層形":"も","読み":"モ"},{"原型":"もも","品詞":"名詞","品詞細分類1":"一般","品詞細分類2":"*","品詞細分類3":"*","活用型":"*","活用形":"*","発音":"モモ","表層形":"もも","読み":"モモ"},{"原型":"の","品詞":"助詞","品詞細分類1":"連体化","品詞細分類2":"*","品詞細分類3":"*","活用型":"*","活用形":"*","発音":"ノ","表層形":"の","読み":"ノ"},{"原型":"うち","品詞":"名詞","品詞細分類1":"非自立","品詞細分類2":"副詞可能","品詞細分類3":"*","活用型":"*","活用形":"*","発音":"ウチ","表層形":"うち","読み":"ウチ"}]}
整形後:
{
"analysis": [
{
"原型": "すもも",
"品詞": "名詞",
"品詞細分類1": "一般",
"品詞細分類2": "*",
"品詞細分類3": "*",
"活用型": "*",
"活用形": "*",
"発音": "スモモ",
"表層形": "すもも",
"読み": "スモモ"
},
{
"原型": "も",
"品詞": "助詞",
"品詞細分類1": "係助詞",
"品詞細分類2": "*",
"品詞細分類3": "*",
"活用型": "*",
"活用形": "*",
"発音": "モ",
"表層形": "も",
"読み": "モ"
},
{
"原型": "もも",
"品詞": "名詞",
"品詞細分類1": "一般",
"品詞細分類2": "*",
"品詞細分類3": "*",
"活用型": "*",
"活用形": "*",
"発音": "モモ",
"表層形": "もも",
"読み": "モモ"
},
{
"原型": "も",
"品詞": "助詞",
"品詞細分類1": "係助詞",
"品詞細分類2": "*",
"品詞細分類3": "*",
"活用型": "*",
"活用形": "*",
"発音": "モ",
"表層形": "も",
"読み": "モ"
},
{
"原型": "もも",
"品詞": "名詞",
"品詞細分類1": "一般",
"品詞細分類2": "*",
"品詞細分類3": "*",
"活用型": "*",
"活用形": "*",
"発音": "モモ",
"表層形": "もも",
"読み": "モモ"
},
{
"原型": "の",
"品詞": "助詞",
"品詞細分類1": "連体化",
"品詞細分類2": "*",
"品詞細分類3": "*",
"活用型": "*",
"活用形": "*",
"発音": "ノ",
"表層形": "の",
"読み": "ノ"
},
{
"原型": "うち",
"品詞": "名詞",
"品詞細分類1": "非自立",
"品詞細分類2": "副詞可能",
"品詞細分類3": "*",
"活用型": "*",
"活用形": "*",
"発音": "ウチ",
"表層形": "うち",
"読み": "ウチ"
}
]
}
/mecab/v1/original/wakatiおよび````/mecab/v1/oroginal/analysis```を利用することで，
実際のコマンドでの出力と同じものを出力できます．
利用方法は変わりません．
function mecab () {
VALUE_O=""
for OPT in "$@"
do
case $OPT in
'-O' )
VALUE_O=$2
shift 2
;;
'-Owakati' )
VALUE_O="wakati"
shift
;;
esac
shift
done
read sentence
if [ "$VALUE_O" = "wakati" ]; then
curl -H 'Content-Type:application/json' \
localhost:5000/mecab/v1/original/wakati \
-d '{"sentence":"'$sentence'"}' -XPOST;
else
curl -H 'Content-Type:application/json' \
localhost:5000/mecab/v1/original/analysis \
-d '{"sentence":"'$sentence'"}' -XPOST;
fi
}
などと定義すれば，MeCabをDockerだけのインストールで呼び出せるようになります．.bash_profileなどに書き込むと便利かもしれません．
Copyright © 2018 · All rights reserved. · Masanori HIRANO
Content type
Image
Digest
Size
92.3 MB
Last updated
about 8 years ago
docker pull mhirano/mecab-api