Ubuntu based docker container with development tools ready to be used to build Yocto Project.
910
This version of yocto is also available on DockerHub. You can pull the docker image from DockerHub using the command:
docker pull mkilivan/docker-yocto-builder
Supossing you're in a directory with a poky project, just run this:
docker run --rm --volume `pwd`:/tmp mkilivan/docker-yocto-builder \
bash -c "cd poky && \
source oe-init-build-env && \
bitbake core-image-sato"
Depending on the host system being run, when executing yocto builds, one might run into the following error:
ERROR: No space left on device or exceeds fs.inotify.max_user_watches?
Please check the max_user_watches value on your host system using:
cat /proc/sys/fs/inotify/max_user_watches
If the value is set too low (eg: 8192), use the following command to set it properly. Please ensure that you have root/sudo priviledges to do this.
sudo sysctl fs.inotify.max_user_watches=1000000
This should solve the problem with No space left on device errors.
Assuming an SD card is attached as /dev/sdd, you can write the image to the card as follows:
sudo dd if=./tmp/deploy/images/raspberrypi3/chaos-image-base-raspberrypi3.rpi-sdimg of=/dev/sdd
Content type
Image
Digest
Size
322.5 MB
Last updated
about 6 years ago
docker pull mkilivan/docker-yocto-builder