pmta/radiosonde repository overview

[me@i7 ~]$ dmesg
:
[ 7085.661269] usb 3-10.2: new high-speed USB device number 14 using xhci_hcd
[ 7085.768938] usb 3-10.2: New USB device found, idVendor=0bda, idProduct=2838, bcdDevice= 1.00
[ 7085.768949] usb 3-10.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7085.768955] usb 3-10.2: Product: RTL2838UHIDIR
[ 7085.768961] usb 3-10.2: Manufacturer: Realtek
[ 7085.768966] usb 3-10.2: SerialNumber: 00000001
[ 7085.776795] usb 3-10.2: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state
[ 7085.830864] usb 3-10.2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 7085.830876] dvbdev: DVB: registering new adapter (Realtek RTL2832U reference design)
[ 7085.838040] i2c i2c-2: Added multiplexed i2c bus 3
[ 7085.838047] rtl2832 2-0010: Realtek RTL2832 successfully attached
[ 7085.838072] usb 3-10.2: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))...
[ 7085.838250] r820t 3-001a: creating new instance
[ 7085.845111] r820t 3-001a: Rafael Micro r820t successfully identified

[me@i7 ~]$ lsusb | grep RTL
Bus 003 Device 014: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 DVB-T
[me@i7 ~]$ 

[me@i7 ~]$ mkdir log
[me@i7 ~]$ docker run -it --privileged -v /dev/bus/usb:/dev/bus/usb -v $(pwd)/log:/radiosonde_auto_rx/auto_rx/log/ -p 5000:5000 pmta/radiosonde
Unable to find image 'pmta/radiosonde:latest' locally
latest: Pulling from pmta/radiosonde
2746a4a261c9: Pull complete 
4c1d20cdee96: Pull complete 
0d3160e1d0de: Pull complete 
c8e37668deea: Pull complete 
70a286f60403: Pull complete 
f7d43e5627bd: Pull complete 
9b4319c64244: Pull complete 
11208b0ba384: Pull complete 
38c2941ec186: Pull complete 
868454f1c30a: Pull complete 
357c4ae0142c: Pull complete 
5ff70816a7b5: Pull complete 
Digest: sha256:69c6e05b082c0437d44e272aa26987b473004aee632377176d527e5dee9121d0
Status: Downloaded newer image for pmta/radiosonde:latest
2020-01-13 18:17:12,564 INFO:Reading configuration file...
2020-01-13 18:17:12,565 ERROR:Config - Invalid or missing email settings. Disabling.
2020-01-13 18:17:12,565 WARNING:Config - Did not find web control / ngp_tweak / gpsd options, using defaults (disabled)
2020-01-13 18:17:20,528 INFO:Config - Tested SDR #0 OK
2020-01-13 18:17:20,532 INFO:Started Flask server on http://0.0.0.0:5000
2020-01-13 18:17:20,533 INFO:Telemetry Logger - Started Telemetry Logger Thread.
 * Serving Flask app "autorx.web" (lazy loading)
 * Environment: production
   WARNING: This is a development server. Do not use it in a production deployment.
2020-01-13 18:17:20,534 INFO:OziMux - Started OziMux / Payload Summary Exporter
   Use a production WSGI server instead.
 * Debug mode: off
2020-01-13 18:17:20,790 INFO:Version - Local Version: 1.2.3  Current Master Version: 1.2.3
2020-01-13 18:17:20,791 INFO:SDR #0 has been allocated to Scanner.
2020-01-13 18:17:29,042 INFO:Scanner #0 - Starting Scanner Thread
2020-01-13 18:17:29,043 INFO:Scanner #0 - Running frequency scan.
2020-01-13 18:17:29,898 INFO:Flask - New Web Client connected!
:
:
2020-01-13 18:23:16,557 INFO:Scanner #0 - Running frequency scan.
2020-01-13 18:23:37,207 INFO:Scanner #0 - Detected peaks on 11 frequencies (MHz): [ 403.    405.46  402.18  403.    400.87  405.    403.2   400.69  401.04
  401.76  401.29]
2020-01-13 18:23:39,380 INFO:Task Manager - Detected new RS41 sonde on 403.000 MHz!
2020-01-13 18:23:39,381 INFO:Halting Scanner to decode detected radiosonde.
2020-01-13 18:23:39,382 INFO:Scanner #0 - Waiting for current scan to finish...
2020-01-13 18:23:55,422 INFO:Scanner #0 - Scanner Thread Closed.
2020-01-13 18:23:55,422 INFO:SDR #0 has been allocated to Decoder (RS41, 403.000 MHz).
2020-01-13 18:24:03,258 INFO:Decoder #0 RS41 403.000 - Using experimental decoder chain.
2020-01-13 18:24:03,272 INFO:Decoder #0 RS41 403.000 - Starting decoder subprocess.
2020-01-13 18:24:06,487 INFO:Telemetry Logger - Opening new log file: /radiosonde_auto_rx/auto_rx/log/20200113-182406_R1940199_RS41_403000_sonde.log
: