Smokeping latency logging, graphing and alerting system.
923
SmokePing is a deluxe latency measurement tool. It can measure, store and display latency, latency distribution and packet loss. SmokePing uses RRDtool to maintain a longterm data-store and to draw pretty graphs, giving up to the minute information on the state of each network connection.
Smokeping supports measuring round trip times of ICMP pings, HTTP request latency, and DNS lookup latency. It can be customized to do other types of probes as well.
The smokeping daemon is in charge of polling, saving data to RRD files. There is a CGI script that provides the web UI at http://localhost/smokeping/smokeping.cgi
Everything required runs in this image. Browse to http://localhost:8087 to view latency data:
docker run \
-d \
--name=smokeping \
-e TZ=Etc/UTC \
-p 8087:80 \
--restart unless-stopped \
docker.io/polymathrobotics/smokeping
If you're using podman, you may need to add --cap-add=NET_RAW to give
the necessary permissions for raw network access:
podman run \
-d \
--cap-add=NET_RAW \
--name=smokeping \
-p 8088:80 \
docker.io/polymathrobotics/smokeping
This cookbook configures five standard probes, IPv4 ICMP ping (FPing), IPv6 ICMP ping (FPing6), HTTP GET (EchoPingHttp), HTTPS GET (EchoPingHttps), and DNS lookup (DNS).
By default the probe is ICMP ping (FPing). This can be overridden at a group level or individual host level.
Probes can also be added/removed by setting the appropriate attribute values
under Probes
There's a few dimensions of data packed into Smokeping charts which make them useful but confusing to interpret at first.
Smokeping will send X probes in a row every Y seconds. The colored bar represents any probe loss (green/purple/red). The position of the colored bar on the y-axis is the RTT average of the probe. The "smoke" is the standard deviation of all the probes.
TL;DR:
Green line, little or tight band of smoke: no packet/probe loss, no variation in probe RTT latency. Life is good.
Purple line, wide band of "smoke": packet/probe loss, lots of variability in probe RTT latency. Things are not going well.
Red line: severe, if not total, packet/probe loss.
Time units on y-axis:
u - Microsecondsm - Milisecondss - SecondsContent type
Image
Digest
sha256:a722cda60…
Size
76.9 MB
Last updated
about 2 years ago
docker pull polymathrobotics/smokeping