raiuka/openwrt_on_docker repository overview

ip link set ens33 promisc on
ip link set ens34 promisc on   

modprobe pppoe

docker network create -d macvlan \
    --subnet=172.16.60.0/24 --gateway=172.16.60.254 \ 
    --ipv6 --subnet=fe80::/16 --gateway=fe80::1 \
    -o parent=ens33 \
    -o macvlan_mode=bridge \
    openwrt-LAN

docker network create -d macvlan \
    --subnet=192.168.0.0/24 --gateway=192.168.0.254 \
    --ipv6 --subnet=fe82::/16 --gateway=fe82::1 \
    -o parent=ens34 \
    -o macvlan_mode=bridge \
    openwrt-WAN

docker run -it -d \
    --restart=always \
    --network=openwrt-LAN \
    --privileged \
    --name=openwrt \
    --cap-add=NET_ADMIN \
    raiuka/openwrt_on_docker \

docker network connect openwrt-WAN openwrt

ip link add link ens33 vLAN type macvlan mode bridge 
ip addr add 172.16.60.253/24 brd + dev vLAN               
ip link set vLAN up
ip route del default                                     
ip route add default via 172.16.60.1 dev vLAN       
     
# 设置静态 dns 服务器（IP地址自行修改）
echo "nameserver 172.16.60.1" > /etc/resolv.conf 

# 进入容器
docker exec -it openwrt /bin/sh

# 编辑 /etc/config/network
config interface 'lan'
        option type 'bridge'
        option ifname 'eth0'
        option proto 'static'
        option ipaddr '172.16.60.1'              #LAN口IP地址自行修改
        option netmask '255.255.255.0'
        option ip6assign '64'

config interface 'wan'
        option proto 'pppoe'
        option ifname 'eth1'                          # 假定ens34接口为WAN口，OpenWRT的eth1接口桥接在ens34接口上
        option username 'PPPOE用户名'
        option password 'PPPOE密码'
        option keepalive '0'
        option ipv6 'auto'


# 重启 openwrt 网络
/etc/init.d/network restart