rtlamr wrapper that outputs formatted json messages over mqtt
7.9K
Metermon is a dockerized rtlamr wrapper that connects to an existing rtl_tcp instance and outputs formatted messages over MQTT for consumption by other software (e.g. telegraf for storage in influxdb and display in grafana).
The script can be run using docker (takes care of all dependencies) or standalone. It is design to run on Raspberry Pi or similar.
All credit for rtlamr goes to bemasher.
Have a MQTT broker you can connect to. I use Mosquitto.
Ensure you have a rtl_tcp instance that is listening for new connections. I use this docker container.
Run the container or script using instructions below.
Subscribe to the mqtt output topic, metermon/output, with the data consumer of your choice.
Process with your data consumer of choice. An example telegraf config is provided.
By default, metermon outputs JSON messages to the metermon/output mqtt topic. The metermon prefix can be changed by setting the MQTT_TOPIC_PREFIX environment variable. Metermon will then send its output messages on [MQTT_TOPIC_PREFIX]/output. Note that adding a trailing / to MQTT_TOPIC_PREFIX will create an empty level.
| Value of MQTT_TOPIC_PREFIX | mqtt output topic |
|---|---|
metermon | metermon/output |
sensors/meters | sensors/meters/output |
sensors/meters/ | sensors/meters//output |
The JSON message has a single level with the following keys:
| Key | Example | Description |
|---|---|---|
| Protocol | SCM | The protocol of the received message. See here for the list. |
| Type | Electric | The meter type of the received message, converted to generic utility type, e.g. "Electric", "Gas", or "Water". See here for mapping of numeric ERT type. |
| ID | 29163678 | The unique ID of the meter the received message originated from. |
| Consumption | 96948.54 | The current consumption value in the received message, processed into standard units (Ex.: electric meters report in 1/100 kWh, metermon divides this value by 100 to get kWh). |
| Unit | kWh | The unit that metermon has converted the value to. Metermon decides this by knowing the type of meter and/or the protocol. |
If the METERMON_SEND_RAW environment variable is set to true, metermon will send the entire unprocessed JSON message received from rtlamr to the [MQTT_TOPIC_PREFIX]/raw topic.
If the METERMON_SEND_BY_ID environment variable is set to true, metermon will also send the processed JSON message received from rtlamr to the [MQTT_TOPIC_PREFIX]/[UNIQUE_ID_OF_METER] topic. This, combined with the use of the RTLAMR_FILTERID environment variable, can make it easier for parsing just a few meters into Home Assistant.
Metermon will report its status on the [MQTT_TOPIC_PREFIX]/status topic via retained messages. Metermon reports Online once it connects to the broker. Upon disconnect, the broker will report Offline.
By adjusting the RTLAMR_SYMBOLLENGTH environment variable, sample rates can be modified to reduce CPU load. See documentation of this feature here and a discussion of the potential performance impacts here.
Pull the image. If using raspberry pi or similar use arm in place of [tag]. The latest tag will pull the amd64 image:
docker pull seanauff/metermon:[tag]
Start the container with all default environment variables:
docker run -d seanauff/metermon:[tag]
Start the container with modified environment variables:
docker run -d -e MQTT_BROKER_HOST=[host] -e RTL_TCP_SERVER=[server] seanauff/metermon:[tag]
| Variable | Default Value | Notes |
|---|---|---|
| MQTT_BROKER_HOST | 127.0.0.1 | IP or hostname of MQTT broker |
| MQTT_BROKER_PORT | 1883 | Port of MQTT broker |
| MQTT_CLIENT_ID | metermon | Change this if the default is already in use by another client |
| MQTT_USERNAME | Username for connecting to MQTT broker when using auth. TLS not currently supported | |
| MQTT_PASSWORD | Password for connecting to MQTT broker when using auth. TLS not currently supported | |
| MQTT_TOPIC_PREFIX | metermon | Set the prefix to use for the MQTT topic that messages are sent to |
| RTL_TCP_SERVER | 127.0.0.1:1234 | server:port that your rtl_tcp instance is listening on |
| RTLAMR_MSGTYPE | all | List of message types to listen for. See rtlamr config |
| RTLAMR_FILTERID | List of meter IDs to look for. See rtlamr config | |
| RTLAMR_SYMBOLLENGTH | 72 | Adjust sample rate by setting the length of each symbol. See rtlamr wiki |
| RTLAMR_UNIQUE | true | Suppress duplicate messages from each meter. See rtlamr config |
| METERMON_SEND_RAW | false | Set to true to enable sending the raw json from rtlamr to the [MQTT_TOPIC_PREFIX]/raw topic |
| METERMON_SEND_BY_ID | false | Set to true to enable sending the processed json to the [MQTT_TOPIC_PREFIX]/[UNIQUE_ID_OF_METER] topic. |
| METERMON_ELECTRIC_DIVISOR | 100.0 | Change this to correct the electricity units that your meter reports in to kWh |
| METERMON_WATER_DIVISOR | 10.0 | Change this to correct the water units that your meter reports in to gal |
Clone the repository and build the image:
git clone https://github.com/seanauff/metermon.git
docker build -t seanauff/metermon metermon
Content type
Image
Digest
sha256:01264bae1…
Size
303.8 MB
Last updated
over 1 year ago
docker pull seanauff/metermon