stefpiatek/codex2 repository overview

⁠CNV-patissier

Orchestrates your Copy Number Variant (CNV) bakeoff, part of research project for Clinical Bioinformatics Scientist Training Programme.

⁠Overview

This project is aimed to collect data on the ability of CNV callers (targeted-capture Next Generation Sequencing) to detect clinically relevant CNVs. All samples should have a gold-standard known-CNV status for the gene in question. This project is aimed at bioinformaticians working in genetics laboratories but please let me know via the issues if there are any problems in installation or running, regardless.

⁠Installation

Example setup for the system and the repository is shown below, using either python's virtual environment or conda environments if you'd prefer. If you are unsure, it is probably simpler to use the python virtual environment

⁠System requirements

At least Python3.6 and Docker (at least engine 1.10) are required for this project, and this has only been developed for unix systems.

1. Example Python installation for Ubuntu⁠

   Example code at time of writing shown, please use link if this is not recent.

   # Check python3 version
   python3 --version
   

   Copy

   If Python version is less than 3.6

   # Add deadsnakes PPA
   sudo apt-get install software-properties-common
   sudo add-apt-repository ppa:deadsnakes/ppa
   # Update apt
   sudo apt-get update
   # install python3.6
   sudo apt-get install python3.6 
   

   Copy

2. Example Docker installation for Ubuntu⁠ with x86_64 architecture. CentOS, Debian and Fedora, along with other achitectures also available from the link.

   Example code at time of writing shown, please use link if this is not recent.

   # Remove older versions of docker. It's fine if apt-get reports that none of the packages are installed
   sudo apt-get remove docker docker-engine docker.io containerd runc
   # Update apt
   sudo apt-get update
   # Install packages to allow apt to use repository over HTTPS
   sudo apt-get install \
       apt-transport-https \
       ca-certificates \
       curl \
   software-properties-common
   # Add Docker's official GPG key
   curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -
   # Verify key by searching for the last 8 characters of fingerprint
   sudo apt-key fingerprint 0EBFCD88
   # Add stable repository for amd64 architecture
   sudo add-apt-repository \
       "deb [arch=amd64] https://download.docker.com/linux/ubuntu \
       $(lsb_release -cs) \
       stable"
   # Update apt
   sudo apt-get update
   # Install Docker ce
   sudo apt-get install docker-ce
   

   Copy

⁠Installation choice 1: Python's virtual enviroment library, venv⁠

1. Clone repository

   git clone https://github.com/stefpiatek/cnv-patissier.git
   

   Copy

2. With Python 3.6, set up virtual environment

   cd cnv-patissier
   # Create the virtual environment
   python3.6 -m venv .venv 
   # Enable the virtual environment
   source .venv/bin/activate
   

   Copy

3. Install requirements

   pip install -r requirements.txt
   

   Copy

⁠Installation choice 2: Anaconda⁠

1. Clone repository

   git clone https://github.com/stefpiatek/cnv-patissier.git
   

   Copy

2. Create conda environment

   cd cnv-patissier
   # Create conda environment
   conda create -n cnv-patissier python=3.6 anaconda
   # Update python
   conda update python
   # Enable the cona environment
   source activate cnv-patissier
   

   Copy

3. Install requirements

   pip install -r requirements.txt
   

   Copy

⁠Setup and usage

⁠Overview of steps taken by CNV-patissier

• CNV-patissier is run per capture and scans the gene sample sheets and runs all CNV callers on every sample per gene.
  • The output from each caller is created in cnv-patissier/output/<capture>/<date-time-of-run>/<cnv-caller>/
  • The known CNV status and called CNVs are saved in a sqlite database in cnv-patissier/output/
  • A successful run settings file is written to cnv-patissier/successful-run-settings/<capture>/<cnv-caller>/<gene>.toml
  • Logs are written to cnv-patissier/logs/
• Each caller checks if there has been a successful run for that gene, if there has and no settings have changed (i.e. sample paths) then it moves onto the next.
• If there hasn't been a successful run the caller is run on that gene.
• If the settings have changed, the previous output will be deleted and the caller will be rerun. If you want to force a rerun, just delete the releveant successful run settings file.

⁠Setup of a capture

1. Create a directory with the name of your capture in this example I will use ICR_example, and then created bed and sample-sheets sub-directories. If in doubt, look at the input/ICR_example directory in cnv-patissier.

   cd cnv-patissier
   mkdir input/ICR_example
   mkdir input/ICR_example/bed
   mkdir input/ICR_example/sample-sheets
   

   Copy

2. Copy your sorted capture bed file as the .bed e.g. cnv-patissier/input/ICR_example/bed/ICR_example.bed

   • The bed file should have the chromosome in the same format as you reference genome (i.e. "chr1" or "1")
   • Please follow the BED format⁠ with chrom, start, end and name delimited by tabs. No header.
   • The name column should be the gene name. If in doubt, please look at the example data in input for ICR_example.

3. For each gene in the capture where you have known CNV-status using a gold-standard, create a tab-delimited sample sheet. e.g. cnv-patissier/input/ICR_example/sample-sheets/BRCA1.txt and cnv-patissier/input/ICR_example/sample-sheets/BRCA2.txt

   • Make sure to create a tab delimited file
   • The name of the file should match the name column of the bed file from step 2
   • Only create a sample sheet where you have at least 30 samples which are known not to have CNV, and have samples with known CNVs. You do not need to have a sample sheet for every gene in your capture.
   • The column names are:
     • sample_id: unique name for the sample
     • sample_path: full path to the bam file
     • result_type : samples that are known to have no CNVs can be either normal-panel or normal. Samples which have a CNV are positive
       • There should be at least 30 normal-panel samples, as many positive samples and a similar number of normal samples
     • Data for positive CNV samples:
       • cnv_call: if dupliation DUP, if deletion DEL. If you really have no way of knowing, please put unknown
       • chromosome: check prefix matches bed file, and reference genome. Can be left blank
       • start: most 3' position of CNV from gold-standard detection, can be left blank
       • end : most 5' position of CNV from gold-standard detection, can be left blank

4. Create settings.py file in the base directory of cnv-patissier

   cd cnv-patissier
   cp example_settings.py settings.py
   # edit the values in the `cnv_pat_settings` dictionary of `settings.py` for your setup
   

   Copy

⁠Running CNV-patissier

# in the root directory of cnv-patissier, with your environment activated 
# e.g.
python cnv-patissier.py ICR_example

⁠Testing

To run the tests

# in the root directory of cnv-patissier, with your environment activated 
python -m pytest tests/