tiroso/hm-mod-rpi-pcb repository overview

TESTED WITH RASPBIAN STRETCH

This container ist for the HM-MOD-RPI-PCB Module. I created it for using with fhem.

On the Host System (Rpi itself) add following lines to "/boot/config.txt":

• enable_uart=1

On Raspberry Pi 3 also add following lines:

• dtoverlay=pi3-miniuart-bt
• core_freq=250

Delete following entry in "/boot/cmdline.txt":

• console=serial0,115200

⁠Run with flash

sudo docker run --rm --device=/dev/ttyAMA0 --device /dev/gpiomem tiroso/hm-mod-rpi-pcb:latest flash

⁠Run normal (socat)

docker run -d --restart always --name hmlan --device=/dev/ttyAMA0 --device /dev/gpiomem --publish "2000:2000" tiroso/hm-mod-rpi-pcb:latest

Don't run multiple hm-mod-rpi-pcb container at the same time.