Sign inSign up

tlinux/clonezilla

By tlinux

•Updated over 3 years ago

Service for DRBL and Clonezilla server

Image
Operating systems
0

1.1K

tlinux/clonezilla repository overview

⁠DRBL and Clonezilla Server

Docker file source for DRBL⁠ and Clonezilla⁠ container image.

⁠Basic

The DRBL and Clonezilla server need 2 network devices, one for internet access, another network device is intranet only. About the network configuration please check doc⁠. This image will use host network as DRBL and Clonezilla Server, please make sure you stop all realted service like: tftp, nfs, dhcp services.

to stop rpcbind(port 111) in debian like system:

sudo systemctl status rpcbind.socket

and also remember to load nfs module before run drbl container

modprobe nfsd

⁠clonezilla

This image provide Clonezilla Server.

⁠run
docker run -itd --rm --network=host --name=clonezilla --cap-add=ALL --privileged -e CLLAN=$DRBL-LAN-CARD -e CLLANIP=$DRBL-LAN-IP -v /home/partimag/:/home/partimag  tlinux/clonezilla:latest
⁠logs
docker logs -f clonezilla

⁠drbl - diskless remote boot linux

This image provide DRBL and Clonezilla Server.

⁠run
docker run -itd --rm  --network=host --name=drbl --cap-add=ALL --privileged -e CLLAN=$DRBL-LAN-CARD -e CLLANIP=$DRBL-LAN-IP -v /home/partimag/:/home/partimag  tlinux/drbl:latest

⁠logs

docker logs -f drbl

⁠more drbl/clonezilla usage

⁠dcs
docker exec -it drbl dcs

⁠Example

My Linux have 2 network interface, ens33 is for internet, ens38 is my LAN.

ens33: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.2.139  netmask 255.255.255.0  broadcast 192.168.2.255
        inet6 fe80::eee5:67da:390d:f5e1  prefixlen 64  scopeid 0x20<link>
        ether 00:0c:29:c1:94:96  txqueuelen 1000  (Ethernet)
        RX packets 8027034  bytes 10822801757 (10.8 GB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 1684725  bytes 1114428572 (1.1 GB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

ens38: flags=4419<UP,BROADCAST,RUNNING,PROMISC,MULTICAST>  mtu 1500
        inet 10.103.19.6  netmask 255.0.0.0  broadcast 10.255.255.255
        ether 00:0c:29:c1:94:a0  txqueuelen 1000  (Ethernet)
        RX packets 1679135  bytes 1765712576 (1.7 GB)
        RX errors 0  dropped 5  overruns 0  frame 0
        TX packets 846043  bytes 1222864098 (1.2 GB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

run clonezilla:

docker run -itd --rm  --network=host --name=clonezilla --cap-add=ALL --privileged -e CLLAN=ens38 -e CLLANIP=10.103.19.6 -v /home/partimag/:/home/partimag  tlinux/clonezilla:latest

⁠Notes

⁠DNS

due to docker engine will copy resolv.conf from host to container while running but container would not run system-resolvd, that is fine for container only not for DRBL. drblpush may get error about nameserver missing. To avoid this error, add --dns while you run docker

docker run -itd --rm  --network=host --dns=8.8.8.8 --name=clonezilla --cap-add=ALL --privileged -e CLLAN=ens38 -e CLLANIP=10.103.19.6 -v /home/partimag/:/home/partimag  tlinux/clonezilla:latest

Tag summary

Content type

Image

Digest

sha256:e6c77db20…

Size

527.8 MB

Last updated

over 3 years ago

docker pull tlinux/clonezilla