Sign inSign up

zoobab/stm32flash-docker

By zoobab

•Updated almost 6 years ago

A container with stm32flash tool

Image
1

1.3K

zoobab/stm32flash-docker repository overview

⁠noswpatv3 Stm32flash in a container

This is an alpine linux based docker image, which contains the stm32flash flashing tool.

⁠Usage

If your serial port adaptor is available at /dev/ttyUSB0, and if your firmware file is present in the current directory and is called Versaloon-STM32F103C8_BluePill.bin, you can flash it with the following oneliner:

$ sudo docker run --privileged -v /dev/ttyUSB0:/dev/ttyUSB0 -v $PWD:/mnt zoobab/stm32flash -w /mnt/Versaloon-STM32F103C8_BluePill.bin -v -g 0x8000000 /dev/ttyUSB0
stm32flash 0.5

http://stm32flash.sourceforge.net/

Using Parser : Raw BINARY
Interface serial_posix: 57600 8E1
Version      : 0x22
Option 1     : 0x00
Option 2     : 0x00
Device ID    : 0x0410 (STM32F10xxx Medium-density)
- RAM        : 20KiB  (512b reserved by bootloader)
- Flash      : 128KiB (size first sector: 4x1024)
- Option RAM : 16b
- System RAM : 2KiB
Write to memory
Erasing memory
Wrote and verified address 0x0800d8ec (100.00%) Done.

Starting execution at address 0x08000000... done.

$

You can also use some variables:

$ export DEVICE="/dev/ttyUSB0"
$ export FILE="Versaloon-STM32F103C8_BluePill.bin"
$ sudo docker run --privileged -v $DEVICE:$DEVICE -v $PWD:/mnt zoobab/stm32flash -w /mnt/$FILE -v -g 0x8000000 $DEVICE

Tag summary

Content type

Image

Digest

Size

2.1 MB

Last updated

almost 6 years ago

docker pull zoobab/stm32flash-docker